KECX KitchenAid Cooktop - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
No Problem
-
Sharon from Emmett, ID
- Really Easy
- Less than 15 mins
Needed new drip pans for range top. Easy fix. Was impressed on how quick the parts were shipped out to me.
Other Parts Used:
Was this helpful?
Thank you for voting!
Old drip bowls, tried prepackaged from box stores
-
Christine from Phoenix, OR
- Really Easy
- Less than 15 mins
After putting up with ill fitting generic versions of our drip bowls, we smartend up and ordered correct parts. They went in super easy, perfect fit and the heating element is now perfectly level. Who knew that following the manufactors recommendations to buy correct parts would make such a difference? Well we know now! Thank you. The
... Read more
parts were shipped almost immediately and delivered as promised.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Drip pans missing
-
Michele from Walnut, CA
- Really Easy
- Less than 15 mins
placed element in drip pan and plugged in. .Fit perfectly.I am very pleased with the product and service.
Other Parts Used:
Was this helpful?
Thank you for voting!
Drip plans needed replacement
-
Margaret from Vero Beach, FL
- Really Easy
- Less than 15 mins
Removed old ones replaced with new oned
Other Parts Used:
Was this helpful?
Thank you for voting!
replacement drip pans didn't fit -- wrong type
-
Rev Connie from Mattawan, MI
- Really Easy
- Less than 15 mins
Purchased appropriate drip pans here. They arrived overnight, much to our surprise! The range elements were easy to remove, and the drip pans fit precisely as they were designed to do. Ta Da! repair completed.
Other Parts Used:
Was this helpful?
Thank you for voting!
Burner element partially heated
-
William from Tucumcari, NM
- Really Easy
- Less than 15 mins
Pulled out old one, plugged in new. Replaced Drip bowl as well.
Other Parts Used:
Was this helpful?
Thank you for voting!
Burner keep coming on and going off had a short in burner plug-in block.
-
Judith from Staunton, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
Turned off stove breaker. Unscrewed burner from stove top, took out burner and spill pan. Lifted top of stove, cut the wire as instructed and put all parts together as instructed. Placed everything back together as instructed. I did it myself!
Was this helpful?
Thank you for voting!
The front left side burner was broken.
-
Yelena from San Francisco, CA
- Really Easy
- Less than 15 mins
-
Nutdriver
We lifted the glass top, uninstalled the old burner and installed the new burner in it's place. It worked right away - and is still working. No other tricks the new burner was a perfect fit.
Was this helpful?
Thank you for voting!
Wrong replacement Drip Pans installed previously caused damge to 8" Burner.
-
Lloyd from Pinellas Park, FL
- Really Easy
- Less than 15 mins
Removed burners and drip pans, replaced drip pans and re-installed burners. Simple....
Other Parts Used:
Was this helpful?
Thank you for voting!
bowls had burnt on food
-
David from Saranac Lake, NY
- Really Easy
- Less than 15 mins
replaced them
Other Parts Used:
Was this helpful?
Thank you for voting!
burner not working
-
gene from kent, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
burner was shorting out replaced part works great
Was this helpful?
Thank you for voting!
burner would not heat up the connection was bad
-
Earl from Union Mills, NC
- Really Easy
- Less than 15 mins
-
Screw drivers
loosened the screw holding the block pulled it out toget to wire cut it about 4 inches long followed the inst.with block kit and it was a breeze. burner working fine now should have did it sooner.
Was this helpful?
Thank you for voting!
rusted drip bowl
-
kyle from Schwenksville, PA
- Really Easy
- Less than 15 mins
remove burner by hand and remove old drip bowl replace with new bowl inspect burner for ware and insert back into slot.
Was this helpful?
Thank you for voting!
Drip Bowl beyond cleaning
-
Ann from Memphis, TN
- Really Easy
- Less than 15 mins
Removed old bowl and dropped in new one!!It looks great - the cooktop is probably 30 years old.Your serviceperson was courteous friendly and very rapid.This actually is the second replacement but I was pleasantly surprised that the part was available. Thanks!!
Other Parts Used:
Was this helpful?
Thank you for voting!
Two drip Bowls needed to be replaced
-
Robin from Boca Raton, FL
- Really Easy
- Less than 15 mins
No tools needed. And it's always great to be able to replace parts on my VERY old counter-top range. It still works very well, and now it also looks great. Delivery was amazingly fast, too! Thanks!
Other Parts Used:
Was this helpful?
Thank you for voting!