KECT305VWH0 KitchenAid Cooktop - Overview

Diagrams for KECT305VWH0

See every part. Know exactly what you need.

Parts for the KECT305VWH0

$47.40

Surface Element Switch

★★★★★

(3)

Part #W10900107

A surface element switch, also known as a burner/infinite switch, is a device used to control and regulate the heat output of the burners on a stovetop or cooktop. This switch is controlled with a knob on the user interface of the cooktop or stovetop and is adjustable by the user. This burner switch is compatible with various ranges and c...Read more

Read less

$149.75

Solid Surface Burner - 8 Inch

Part #WP3147132

Sold individually.

$128.66

Solid Surface Burner - 6 Inch

★★★★★

(2)

Part #WP3147131

Sold individually.

Burner Knob - Black

Part #3179203

Sold individually.

TRIM-RING

Part #3148486

TRIM-RING

Part #3148489

TRIM-RING

Part #3147186

SEAL-SLCNE

Part #3179164

TRIM-RING

Part #3147185

GASKT-ELMT

Part #3185126

RING-GSKT

Part #3147187

RING-GSKT

Part #3147188

Manuals & Care Guides for KECT305VWH0

Click to download

Install

Installation Instructions

(0.29MB)

Common Symptoms of the KECT305VWH0

How this model fails, and the parts that fix it.

Element will not heat

Fixed by
these parts

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Burner would not heat

27 of 35 people found this instruction helpful.

Edward from Malvern, AR
A Bit Difficult
30 - 60 mins
Pliers, Screw drivers

First i shut off the power since this is an electric cook top/range. I then removed the knob and the two screws that hold the burner switch in place. I removed the wires one at a time and connected each to the new switch. I then reattached the screws to the switch. The most difficult part to me was breaking off the switch stem at the ... Read more

Read less

Was this helpful?

burner quite heating discovered switch was the problem

9 of 12 people found this instruction helpful.

Ronald from McClelland, IA
Really Easy
15 - 30 mins
Pliers, Screw drivers

lifted hood top unscrewed 4 small screws opening lid to switch housing took out 2 small screws that held the switch and then transfered wires to new switch replaced new switch with 2 new screws and back to working again walla! Time spent less than 30 minutes very simple as the instructions were very self explainatory.

Was this helpful?

The switch had shorted

8 of 12 people found this instruction helpful.

Stephen from COlleyville, TX
Really Easy
15 - 30 mins
Nutdriver, Pliers

I reviewed the schematic. Removed the outer casing. Pulled out the existing wires and replaced them exactly on the new switch. Snipped out off the control stem to match the others. There was a small metal piece on the old stem which holds on the knob. I removed it from the old stem and put it on the new stem and Eureka.

Was this helpful?