KECO375MS KitchenAid Wall Oven - Instructions

Repair was simple after I found out how to get access (via 4 screws on the top edge). The plastic plug at the dial center was pried out & screws securing timer dial removed. The screws securing the timer were behind the dial plate. With the old timer out the wires were carefully swapped and the system reassembled.

This repair can be made from the front of the machine without having to pull the dryer out for access. Remove the power cord from the wall outlet. Remove the four (4) phillips head screws on the top of the control panel. (Two screws on each side. ) Gently pry the cap from the center of the control knob. Use a 7/16 " nutdriver or socke ... Read more t to unscrew the nut holding the timer shaft. This also allows access to the two screws behind the timer dial. Use a 1/4" nutdriver or socket to remove the two screws allowing removal of the timer from the panel. Orientate the replacement timer to the old unit and relocate each wire one at a time. Be sure each wire is firmly secure to the new timer. Reverse the procedure to install the new timer.

I pried out the plastic cover on the front of the timer knob using the head of a nail. The timer knob was held on by a nut which I removed. After removing the timer knob and associated parts I removed the two screws holding on the dryer timer. I then removed four screws on the top of the dryer (two on each side). I tilted the control pa ... Read more nel forward to expose the dryer timer. The new timer looked different than the timer in the dryer but I followed the color code on the contacts to move the wires from the old timer to the new timer. I put everything back together and the dryer works great.