Models > KECC568GAL0

KECC568GAL0 KitchenAid Cooktop - Overview

Sections of the KECC568GAL0

[Viewing 1 of 1]

Manuals & Care Guides for KECC568GAL0

Click to download
Keep searches simple, eg. "belt" or "pump".
Dual Surface Element - 2500w/1200w – Part Number: W10823692
Dual Surface Element - 2500w/1200w
★★★★★
★★★★★
(10)
PartSelect #: PS11764902
Manufacturer #: W10823692
This is the replacement large surface element for your cooktop or range. It is approximately 10-inches in diameter and is 1200/2500 watts. The large surface element is installed under the cooktop and ...
$229.84
  In Stock
Cooktop Cleaner – Part Number: W10355051
Cooktop Cleaner
★★★★★
★★★★★
(6)
PartSelect #: PS3492527
Manufacturer #: W10355051
This bottle of non-abrasive cooktop cleaner breaks down and gets rid of the hardest baked-on stains and residue without causing any harm to your appliance. The bottle is 10 oz and does not require a l...
$17.76
  In Stock
ELMNT-SURF – Part Number: W10823693
ELMNT-SURF
★★★★★
★★★★★
(2)
PartSelect #: PS11764903
Manufacturer #: W10823693
$197.50
  In Stock
Screw - 8-16 x 1/2 – Part Number: 4449746
Screw - 8-16 x 1/2
PartSelect #: PS374225
Manufacturer #: 4449746
Sold individually.
  No Longer Available
Screw – Part Number: WP3196557
Screw
PartSelect #: PS11740992
Manufacturer #: WP3196557
Sold individually.
$7.76
  In Stock
Screw – Part Number: WP486754
Screw
PartSelect #: PS11742701
Manufacturer #: WP486754
Sold individually.
$8.04
  In Stock
Surface Ribbon Element with Limiter - Small – Part Number: WP32082801
Surface Ribbon Element with Limiter - Small
★★★★★
★★★★★
(2)
PartSelect #: PS11741007
Manufacturer #: WP32082801
This is a 1200 watt / 240 volt surface element.
  No Longer Available
Main Glass Cooktop - Black – Part Number: 4455561
Main Glass Cooktop - Black
★★★★★
★★★★★
(1)
PartSelect #: PS375589
Manufacturer #: 4455561
  No Longer Available
CLIP – Part Number: 16515
CLIP
PartSelect #: PS320616
Manufacturer #: 16515
$15.10
  In Stock
Wire Harness Clip – Part Number: WP98997
Wire Harness Clip
PartSelect #: PS11747591
Manufacturer #: WP98997
Sold individually.
$9.77
  Special Order
SPRING – Part Number: 3191791
SPRING
PartSelect #: PS339590
Manufacturer #: 3191791
  No Longer Available
LIMITER – Part Number: 3191966
LIMITER
PartSelect #: PS339647
Manufacturer #: 3191966
  No Longer Available

Questions And Answers for KECC568GAL0

Be the first to ask our experts a question about this model!

Common Symptoms of the KECC568GAL0

[Viewing 2 of 2]
Element will not heat
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Radiant element, 2400 watt, under Ceran glass cok top needed replacement.
turned off power
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done
Parts Used:
Dual Surface Element - 2500w/1200w
  • GEORGE from NEWNAN, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
164 of 249 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad Element
Bought new element and installed. Very simple. Used phillips
screw driver.
Parts Used:
Dual Surface Element - 2500w/1200w
  • Michael from Howell, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
74 of 120 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
double coil which center coil had burned out on glass top range
Unplug range and remove back panel (4 screws) unplug top burner plugs (2). Open oven door and remove 2 screws from under front of top. Pull top out and up to unhook from back. Remove top and lay cardboard on top of range. Flip over the ranges glass top unit and lay on cardboard. Remove screws from steel bottom and remove from top. Flip over steel bottom with burners attached. Remove attaching clips for burner and unscrew them from the burner then reinstall in new burner in the same place as old burner. Lay new burner on top of old burner and remove one wire at a time, transfering it to the matching plug on the new burner. When wiring is done remove old burner and attach 2 clips to steel backing plate. Vacuum off the glass top and reinstall the steel bottom to the glass top. Flip over the top, remove cardboard and slide top into back of range top and lower into place. Attach 2 screws under front. Reattach the tops plugs at the rear and reattach the back panel. Plug in range and slide back into place. Test units and all other burners. Done...
Parts Used:
Dual Surface Element - 2500w/1200w
  • Frank from Owls Head, ME
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
50 of 56 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!