This 10-32-inch hex nut works with multiple appliances in your home as a fastener. This specific model is sold individually. Hex nuts usually have 6 even sides and together they are used with bolts and screws in order to hold items firmly together. This piece is a fastener that attaches one item to another. This part has several advantage...Read mores, the main one being that it is universal and can be used with most pieces and appliances in your home. This hex nut is an original equipment manufacturer part, meaning it is directly sourced from the manufacturer.
This surface heating element delivers adjustable heat output, allowing effective cooking at multiple power levels. Designed for even heat distribution, it is replaced when heating becomes uneven, weak, or nonfunctional.
This radiant surface heating element is designed to deliver consistent heat to a designated cooking zone on select electric ranges. Measuring approximately 6 inches in diameter and rated at 1200 watts, it provides reliable performance for boiling, simmering, and general stovetop cooking. The element glows red when active, indicating heat ...Read moregeneration, and is engineered to fit securely into compatible cooktops using existing mounting and electrical connections. As a genuine OEM component, it ensures compatibility and long-term durability. Replacing a worn or non-functional element restores efficient heat distribution and safe operation.
This foam tape provides cushioning and sealing between components to reduce vibration and air gaps. Designed for flexibility and durability, it supports quiet operation and effective insulation.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Loose terminal caused block to overheat and break
6 of 10 peoplefound this instruction helpful.
Dana from Black Mountain, NC
Really Easy
Less than 15 mins
Nutdriver, Screw drivers
Removed all terminals and block mounting screws. Repaired one burnt terminal and reassembled. Replacement part was an exact fit and reassembly whnet very well.
Was this helpful?
Thank you for voting!
I snapped a bolt on the main power terminal block when connecting the pigtail.
3 of 8 peoplefound this instruction helpful.
Frank from Palm Coast, FL
Easy
15 - 30 mins
Screw drivers, Socket set
Removed the small metal panel covering the main power terminal in back of the electric range. Removed the nuts holding the red, white and black electrical wires from the range using the appropriate socket (there will be two nuts on each bolt end). Removed the two screws holding the main power terminal block with appropriate screw driver.
... Read moreConnect the new main power terminal block to the range using the two screws. Reconnect the red, black and white electrical wires coming from the range using one nut for each wire. IMPORTANT: do no over tighten the nuts because the bolts could snap. Reconnect the pigtail and secure the small metal panel covering the main power panel.
Read less
Was this helpful?
Thank you for voting!
wire came loose and shorted out
1 of 2 peoplefound this instruction helpful.
Elizabeth from HOUSTON, TX
Really Easy
30 - 60 mins
Pliers, Screw drivers
Ordering the part online was easy. It arrived in a timely manner. I found a terrific video online showing how to install the terminal. It was so easy. Thank you for the great instructional video.