EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

KECC508GBT3 KitchenAid Cooktop - Overview

Diagrams for KECC508GBT3

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Element with Limiter 6 Inch - 1200W – Part Number: W10823711
$142.40
In Stock
Element with Limiter 6 Inch - 1200W
★★★★★
★★★★★
(19)
Part #W10823711
This is a radiant surface element with limiter, and it works in conjunction with your range. The function of this part is to give heat to the surface directly above it, on cooking area stove top.This model is sold individually and is 1200 watts. The main reason for needing to replace this part is if your element will not heat. Before ordering, make sure to test your stove top radiant element for continuity to make sure it is the problem. To make this installation you will need a Phillips screwdriver, and a 14-inch nut driver.
Dual Surface Element - 2500w/1200w – Part Number: W10823692
$142.40
In Stock
Dual Surface Element - 2500w/1200w
★★★★★
★★★★★
(12)
Part #W10823692
This is the replacement large surface element for your cooktop or range. It is approximately 10-inches in diameter and is 1200/2500 watts. The large surface element is installed under the cooktop and heats up the area directly above it. You will need to replace the element if it does not heat up properly. As you will be working around electricity, be sure that your range is disconnected from power before you begin this repair. This is an OEM part sourced directly from the manufacturer.
Cooktop Cleaner – Part Number: W10355051
No Longer Available
Cooktop Cleaner
★★★★★
★★★★★
(7)
Part #W10355051
This bottle of non-abrasive cooktop cleaner breaks down and gets rid of the hardest baked-on stains and residue without causing any harm to your appliance. The bottle is 10 oz and does not require a large amount of product to do the job. This cleaner is perfectly safe to use on any glass, ceramic, stainless steel, chrome, or porcelain cooktop surface. The cleaner is creamy in texture and provides a protective coat of silicone on smooth surfaces. To apply, use a gentle scrub, sponge, or rag and gently press in a circular motion until the stains are removed.
Range Screw – Part Number: WP3196163
$7.47
On Order
Range Screw
★★★★★
★★★★★
(1)
Part #WP3196163
This screw is sold individually.
Burner Element - Right Front – Part Number: W10823698
$135.62
In Stock
Burner Element - Right Front
★★★★★
★★★★★
(3)
Part #W10823698
This surface element is for ranges. The surface element supplies the heat to a cooking area on top of the range. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Range Hex Nut – Part Number: WP112432
$7.47
In Stock
Range Hex Nut
Part #WP112432
This 10-32-inch hex nut works with multiple appliances in your home as a fastener. This specific model is sold individually. Hex nuts usually have 6 even sides and together they are used with bolts and screws in order to hold items firmly together. This piece is a fastener that attaches one item to another. This part has several advantages, the main one being that it is universal and can be used with most pieces and appliances in your home. This hex nut is an original equipment manufacturer part, meaning it is directly sourced from the manufacturer.
Range Main Power Terminal Block – Part Number: WP8203546
$24.67
In Stock
Screw - 8-16 x 1/2 – Part Number: 4449746
No Longer Available
Screw - 8-16 x 1/2
Part #4449746
Sold individually.
Refrigerator Screw – Part Number: WP3196557
$7.47
In Stock
Refrigerator Screw
Part #WP3196557
Sold individually.
Screw – Part Number: WP486754
$7.47
In Stock
Screw
Part #WP486754
Sold individually.
Zip Tie – Part Number: WPW10339879
$7.47
In Stock
Zip Tie
Part #WPW10339879
A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly together using a zip tie. It is a flexible, plastic strip that has serrated teeth and a locking mechanism. If the zip tie is damaged, it should be replaced. Freely moving wires may rub against surfaces, causing them to break over time. Zip ties are single-use and may not be reused after they are removed from a machine. To release the locking mechanism, you will need to insert a small flat tool into the head of the zip tie, between the tongue and the serration, and depress the bar. You can then pull the teeth out of the mechanism to loosen the cable tie. This part is produced by the original equipment manufacturer and is sold individually.

Common Symptoms of the KECC508GBT3

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Right rear burner went bad
155 of 190 people found this instruction helpful.
  • Mark from Loxahatchee, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Turned the breaker off, I removed 2 screws securing the range top to the range, opened the top and secured it in the up position, Removed the 2 screws securing the element ,one at a time I swapped the quick connectors from the old element to the new and repeated the process in reverse. I save over $100.00 in labor, plus most companies get you for a trip charge. It was easy!!
Was this helpful?
Thank you for voting!
Radiant element, 2400 watt, under Ceran glass cok top needed replacement.
171 of 261 people found this instruction helpful.
  • GEORGE from NEWNAN, GA
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
turned off power
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done
Was this helpful?
Thank you for voting!
Hot Burner Light always on
109 of 159 people found this instruction helpful.
  • Gregory from Cary, NC
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Thermal switch is integral to element and can not be changed, must replace entire element.

Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numer ical position and then moved wiring to new element. Slide new element under bracket and reinstalled single screw. Replaced top and screwed down. Turn on power and test .
Was this helpful?
Thank you for voting!