Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KECC507KBL03

KECC507KBL03 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KECC507KBL03

If you know the cooktop repair part you need, you can browse the list of all parts on the KECC507KBL03, or you can search by name or part description. You can also find your part by where it is located on the KECC507KBL03 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KECC507KBL03

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$13.03

Surface Burner Knob

This knob allows you to turn the burner on your range or cooktop on, and it allows you to control the temperature of the burner. If your knob is broken, damaged, or lost, this is t...

$103.88

Dual Surface Element - 2500w/1200w

With this element, you can adjust the size of the burner you want to use to match your pots/pans.

$58.80

Surface Element - 1500W

This surface element is made for under glass set-ups and supplies the heat to a cooking area on top of the range. It has an outside diameter of approximately 7 inches (1500 watts),...

$16.53

Burner Knob

Sold individually. This knob accepts a double-flat shaft.

$9.06

Burner Knob

Sold individually. This bisque knob accepts a double-flat shaft.

$48.30

6" Surface Element Infinite Switch

This switch controls the stove top surface burner.

$57.09

Dual Burner Control Switch

This switch controls the stove top surface burner.

$29.13

Cooktop Mounting Bracket & Screw

$18.20

SEAL-SWTCH

$3.69

BRACKET, BURNER

Sold individually.

Common Symptoms of the KECC507KBL03

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Radiant element, 2400 watt, under Ceran glass cok top needed replacement.

  • Customer: GEORGE from NEWNAN, GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 137 of 211 people found this instruction helpful
turned off power
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done read more

Bad Element

  • Customer: Michael from Howell, MI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 63 of 106 people found this instruction helpful
Bought new element and installed. Very simple. Used phillips
screw driver. read more

double coil which center coil had burned out on glass top range

  • Customer: Frank from Owls Head, ME
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 38 of 44 people found this instruction helpful
Unplug range and remove back panel (4 screws) unplug top burner plugs (2). Open oven door and remove 2 screws from under front of top. Pull top out and up to unhook from back. Remove top and lay cardboard on top of range. Flip over the ranges glass top unit and lay on cardboard. Remove screws from steel bottom and remove from top. Flip over steel bottom with... read more