This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This part is for oven ranges, it connects individual wires and protects the device from electrical surges, voltages, and current. With this part, the house power is connected to the range wire harness...
This is cookware designed for use in your range or oven. It is a two-piece dish that is used to grill or cook food while the broil function is on, meaning it can withstand high temperatures. This set ...
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
February 26, 2022
Error code 2ei, do I need a new control panel?
For model number KEBS207BSS00
Hello Harold, Thank you for the question. The 2ei is not showing to be a valid Error code. We do show a F2-E1 error code that indicates the Touch Pad Cable is Unplugged. If this is the error code you have, we suggest checking the connections. Select the 'cancel' function and wait 60 seconds. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
November 30, 2019
The bottom stove temp. Is all over the place. While cooking a turkey at 325 - the temp changed by itself to 120f. Could not to get it back to 325. Later I tried again and it moved to 325. Then it would slowly drop in temp.What is going on? thanks
Hi John, the thermostat likely needs replacement. Thank you for your question and good luck with your repair!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.