The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of metal. It is recommended to check all brackets, if applicable, because they often wear ...Read moreat the same rate and both may need to be replaced. This is an OEM part that is sourced from the authentic manufacturer. Tools needed are a pair of needle nose pliers and a screwdriver.
This part has a swivel gooseneck fitting and that allows it to be installed closer to the wall. This part has a 3/4" hose thread on one side and a 3/8" copper tubing on the other side.
The water inlet valve assembly is a crucial component of dishwashers that controls the flow of water into the unit. This genuine OEM replacement part includes the inlet valve, inlet hose, and hose clamp to ensure the proper water supply for your dishwasher’s operation. Designed for specific models, this part ensures that water is fed into...Read more the dishwasher during the wash cycle, promoting efficient cleaning. Before installation, it is important to unplug the dishwasher and turn off the water supply to avoid any accidents. Wear work gloves for your safety during the installation process. Be sure to verify the compatibility with your dishwasher’s model number, as similar-looking parts may have slight variations in size or design.
This dishwasher hose is designed to connect the circulation pump to the sump, ensuring efficient water flow during both cleaning and draining cycles. Crafted for durability, it withstands daily exposure to heat and water pressure, helping maintain optimal dishwasher performance. Measuring approximately [insert dimensions if known], the ho...Read morese is constructed from high-quality materials to resist cracking and mineral buildup over time. Installation involves securely attaching the hose between the pump and sump, typically requiring basic tools and access to the lower interior of the dishwasher. Regular inspection and timely replacement can prevent issues such as leaks or standing water caused by wear or damage.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Greg - For model number Kdte204kps1
May 27, 2026
Won't finish cycle and leaves water in dishwasher. Cancel/ drain won't pump. Reset breaker for hours usually works. Tired of this machine. Is there a second filter underneath that is clogged or is this new machine junk.
Hello Greg, thank you for reaching out to us. Your dishwasher has a 3-part filtration setup. The upper filter assembly, the cylindrical piece in the center. You remove this by twisting it a quarter turn counterclockwise. Once the top cylinder is removed, reach down into the circular opening and pull the heavy mesh lower filter out. Also, remove the diverter, a flat silver metal piece under the filters gets caked with scum and restricts flow. Take all three parts to the sink, run them under warm water, and scrub them gently with an old toothbrush to clear the food particles and calcium buildup. Inpsect the check valve, part number PS16745118. If it gets jammed with a piece of plastic (like from a wash pod) or deteriorates, it acts like a closed door and stops water from pumping out. If these step do not help, you will need to replace the drain pump, part number PS16218089, to fix the issue. We hope this information helps!
Hello, I’m looking for the circulation pump for this model dishwasher. Can you please help me find it. Thank you for your time.
Hi Josh, thank you for reaching out. The circulation pump for model KDTE204KPS1 is listed as PS16218088. Thank you for the inquiry, good luck with the repair!
We need to get a new operation button panel (the buttons on the top of the door that us use to operate the dishwasher) but I cannot find the correct part. Help please!
Hi Moriah, thank you for reaching out. The dishwasher console control panel for your model is part number PS16745113. We hope this helps.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lost dishwasher brackets
78 of 118 peoplefound this instruction helpful.
Judith from Essex, MA
Easy
15 - 30 mins
Screw drivers
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
Was this helpful?
Thank you for voting!
Inlet valve leaking at water connection
17 of 25 peoplefound this instruction helpful.
Joseph from BIRMINGHAM, MI
Really Easy
30 - 60 mins
Nutdriver
The valve has a plastic fitting to attach the the water line with a hose fitting. Was not carful enough with the original and damaged it attaching the water line. Ordered a replacement fitting. While it is possible to replace the water inlet valve without pulling the dishwasher out from the cabinet found it was easier to get at with the m
... Read moreachine out. The video does and good job of showing the removal and replacing the valve. Easy job, don't be like me and be careful attaching the water line.
Read less
Was this helpful?
Thank you for voting!
Bottom dishrack had several exposed rusted prongs
7 of 7 peoplefound this instruction helpful.
Tamera from McKinney, TX
Really Easy
15 - 30 mins
I searched for another dishrack that was compatible with our unit. After measuring and searching online I found Partselect website and placed the order. It was a very easy process. I bought the rack without wheels and just removed the ones from our current bottom rack and put them on the new rack.
My Orders
