The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of metal. It is recommended to check all brackets, if applicable, because they often wear ...Read moreat the same rate and both may need to be replaced. This is an OEM part that is sourced from the authentic manufacturer. Tools needed are a pair of needle nose pliers and a screwdriver.
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on th...Read moree appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be care...Read moreful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
This part has a swivel gooseneck fitting and that allows it to be installed closer to the wall. This part has a 3/4" hose thread on one side and a 3/8" copper tubing on the other side.
The water inlet valve assembly is a crucial component of dishwashers that controls the flow of water into the unit. This genuine OEM replacement part includes the inlet valve, inlet hose, and hose clamp to ensure the proper water supply for your dishwasher’s operation. Designed for specific models, this part ensures that water is fed into...Read more the dishwasher during the wash cycle, promoting efficient cleaning. Before installation, it is important to unplug the dishwasher and turn off the water supply to avoid any accidents. Wear work gloves for your safety during the installation process. Be sure to verify the compatibility with your dishwasher’s model number, as similar-looking parts may have slight variations in size or design.
This heating element is a genuine OEM replacement sourced directly from the original manufacturer for use in various models of dishwashers. The element is designed to heat water inside the dishwasher during the wash and rinse cycles to enhance the efficiency of the cleaning process. It is positioned at the bottom of the dishwasher tub, be...Read moreneath the lower rack. The heating element includes a bushing, which is a protective covering that prevents water from coming into contact with the electric terminals, and two plastic nuts.
This lower door seal is a flexible rubber gasket designed to create a watertight barrier at the bottom of your dishwasher door, preventing leaks, steam, and detergent from escaping during wash cycles. Its ribbed press-in design and soft sealing lip ensure a secure fit for long-lasting performance. If you notice water pooling on the floor,...Read more visible cracks, or wear on the old gasket, replacing it will restore proper sealing and protect your kitchen from damage. Installation is quick and simple, requiring no special tools, making it an easy DIY solution for maintaining your dishwasher’s efficiency.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephen - For model number KDTE204KPS0
November 21, 2023
I think a spring broke on the door (hinge?).
Door falls free to open position
Don't see a separate spring.
.
Hello Stephen, thank you for getting in touch. We have researched and found that the spring comes as a part of the door hinge, which prevents the door from falling freely. Your model comes with two door hinges. The left door hinge is part number PS16660571, and the right door hinge is part number PS16660570. If you need help placing an order, customer service is open 7 days a week!
Does this washer come with drain hose. As i bought a store model and it did not come with hose. Also owners manual was not given. Any help is appreciated.
Hello Lynn, thank you for getting in touch. According to our research, the drain hose, part number PS12745420, is compatible with your model number. We hope this helps.
Dishwasher will not reset, tried required reset functions and control panel reset guidelines, no success
Hi John, thank you for contacting us. To reset the dishwasher, press the cycle or normal button and select r. If this does not help, then you may need to check the electronic control board, part number PS16218093, to fix the issue. We hope this sorts out your problem!
Hello Mark, Thank you for the question. We only list the OEM parts that come with the appliance sorry. We strongly recommend you contact the manufacturer, as they would have this information in their system. Ask them for the part number you require and contact back to see if it is something we carry. We hope this helps!
Was this helpful?
Thank you for voting!
John - For model number KDTE204KPS0
March 5, 2024
The “cleaning “ lite flashes 8 times. Tried cleaning the filter and turned off the circuit breaker for 12 hours and it still will not reset. Is there a chance the control board is defective? It’s 2 years old.
Hello John, thank you for reaching out. Based on the description that you have provided, we would recommend checking the touchpad and control panel, part number PS16218074, to solve the problem. We hope that helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lost dishwasher brackets
78 of 118 peoplefound this instruction helpful.
Judith from Essex, MA
Easy
15 - 30 mins
Screw drivers
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
Was this helpful?
Thank you for voting!
Leaking Dishwasher
29 of 32 peoplefound this instruction helpful.
Scott from ISLE, MN
Easy
30 - 60 mins
Screw drivers, Wrench (Adjustable)
After pulling the dishwasher out, I was able to determine the leak was occurring around the plastic nuts on the end of the heating element. I removed the heating element and saw that even though there were washers on the ends that protruded through the backside of the machine, they really weren't sealing the holes the element was sticking
... Read more through. Looking at YouTube videos on the installation procedure, I noticed the element being installed had a sort of metal grommet permanently affixed to each end and the rubber washers were between the grommet and the dishwasher body. I ordered the new part and saw this to be when I received the new part. This grommet allowed the washer to seal the hole, once the plastic nuts were installed on the backside of the dishwasher. This seems to have stopped the leak. I don't know how the original part ever worked correctly, since the washers freely sat on the element with nothing to force them up against the body of the dishwasher and seal the holes. It may have been leaking long before I discovered the problem.
Read less
Was this helpful?
Thank you for voting!
Inlet valve leaking at water connection
17 of 25 peoplefound this instruction helpful.
Joseph from BIRMINGHAM, MI
Really Easy
30 - 60 mins
Nutdriver
The valve has a plastic fitting to attach the the water line with a hose fitting. Was not carful enough with the original and damaged it attaching the water line. Ordered a replacement fitting. While it is possible to replace the water inlet valve without pulling the dishwasher out from the cabinet found it was easier to get at with the m
... Read moreachine out. The video does and good job of showing the removal and replacing the valve. Easy job, don't be like me and be careful attaching the water line.
My Orders
