EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

KDPS624SPS0 Whirlpool Dishwasher - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dishwasher Mounting Bracket – Part Number: WP8269145
$15.00
In Stock
Dishwasher Mounting Bracket
★★★★★
★★★★★
(14)
Part #WP8269145
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of metal. It is recommended to check all brackets, if applicable, because they often wear at the same rate and both may need to be replaced. This is an OEM part that is sourced from the authentic manufacturer. Tools needed are a pair of needle nose pliers and a screwdriver.
Dishwasher Screw – Part Number: WPW10348409
$7.47
In Stock
Dishwasher Screw
★★★★★
★★★★★
(6)
Part #WPW10348409
Sold individually.
Hose Clamp – Part Number: WP285655
$9.62
In Stock
Hose Clamp
★★★★★
★★★★★
(2)
Part #WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
STOP – Part Number: W11545307
$22.52
In Stock
MANIFOLD – Part Number: W11545334
$52.95
Special Order
STRIKE – Part Number: W11545309
$21.45
In Stock
Drain Pump – Part Number: W11412291
$85.55
In Stock
Drain Pump
Part #W11412291
SCREW – Part Number: W11551775
$21.45
In Stock
SCREW
Part #W11551775
This screw provides secure fastening for components, helping maintain proper alignment and structural stability during operation. Correct fastening reduces vibration, prevents component movement, and supports long-term reliability. Replacing missing or damaged screws restores secure assembly and dependable performance.
PANEL – Part Number: W11545318
$27.36
In Stock
PANEL
Part #W11545318
LATCH-DOOR – Part Number: W11412299
$22.52
In Stock
LATCH-DOOR
Part #W11412299
Screw – Part Number: WPW10309090
$46.34
In Stock
Screw
Part #WPW10309090
A missing, loose, or stripped screw can let a dishwasher panel, bracket, or rack part move during use. This 10-16 screw holds the correct part in place and is made for a damp setting. Before replacing it, inspect the mounting hole and the part being held for cracks or worn threads. Confirm the screw size, length, and location with the full dishwasher model. Turn off power and water if the repair requires opening a panel. Start the screw by hand, tighten it only until snug, and never use a longer screw that could damage hidden parts.
SWITCH – Part Number: W11545764
$27.36
In Stock
SWITCH
Part #W11545764
This dishwasher float switch helps monitor water levels during operation to prevent overfilling and potential leaks. When the water level reaches the correct height, the switch signals the dishwasher to stop filling and drain as needed. Replacing a faulty float switch can resolve issues such as the dishwasher not filling properly or water continuing to fill and overflow. Installation is straightforward and can be completed with basic tools.

Common Symptoms of the KDPS624SPS0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lost dishwasher brackets
78 of 118 people found this instruction helpful.
  • Judith from Essex, MA
  • Easy
  • 15 - 30 mins
  • Screw drivers
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
Was this helpful?
Thank you for voting!
I was getting the F9 E1 error code intermittently then consistently.
11 of 14 people found this instruction helpful.
  • Bruce from MADISON, MS
  • Easy
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set
Checked drain hose and it was clear without kinks. I shut of the electrical breaker. Verified no power to washer. Removed the lower trim panel. Lowered the adjustable feet to allow me to slide my unit out. Disconnected drain hose from unit. Pulled unit from cabinet. My drain pump is located on the right bottom side when facing the door of the unit. I did not need to lay the unit on its side and have enough power cable to not have to disconnect it while still pulling the unit all the way out of the cabinet. The pump is easily accessed from the right side hidden behind insulation. Disconnected power wire from pump. Pressed down locking latch and turned pump counter clockwise removed then replaced in opposite order. I have run 3 load’s before posting this and as of now my dishwasher is functioning perfectly.
Was this helpful?
Thank you for voting!
Replace dishwasher drain pump
8 of 9 people found this instruction helpful.
  • Whit from Pleasanton, CA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Wrench (Adjustable)
Relatively simple. Unhook electrical, water supply, and hose from drain air gap. Unscrew two screws that hold in the dishwasher and pull it out slowly making sure you do not damage the insulation.

Have a couple of towels nearby because when you tip the dishwasher on it's side some water will spill out.

Locate the o ld drain pump, disconnect it. Then pull the lever on the side of the pump and twist it off. Check to see if there are any materials that may be blocking the pump. Also good time to clean out the drain line.

Insert the new pump and put everything back in reverse order.
Make sure the dishwasher is level horizontally and vertically.
Was this helpful?
Thank you for voting!