KDPM804KBS3 Whirlpool Dishwasher - Parts

The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of metal. It is recommended to check all brackets, if applicable, because they often wear ...Read moreat the same rate and both may need to be replaced. This is an OEM part that is sourced from the authentic manufacturer. Tools needed are a pair of needle nose pliers and a screwdriver.

The tine row on your dishwasher rack divides the rack into columns to keep your kitchen items in place during the washing cycle. If you notice that one or more of the tines on your current tine row is damaged, you should consider replacing it. This product is made of gray plastic and is approximately 21 inches in length. This tine row con...Read moretains 11 straight tines and 1 curved tine. This product is sold individually. Many of our customers have rated this repair as very easy. To complete this repair, simply remove the old tine row and replace it with the new one.

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on th...Read moree appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.

Sold individually.

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be care...Read moreful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.

Sold individually.

This part has a swivel gooseneck fitting and that allows it to be installed closer to the wall. This part has a 3/4" hose thread on one side and a 3/8" copper tubing on the other side.

The water inlet valve assembly is a crucial component of dishwashers that controls the flow of water into the unit. This genuine OEM replacement part includes the inlet valve, inlet hose, and hose clamp to ensure the proper water supply for your dishwasher’s operation. Designed for specific models, this part ensures that water is fed into...Read more the dishwasher during the wash cycle, promoting efficient cleaning. Before installation, it is important to unplug the dishwasher and turn off the water supply to avoid any accidents. Wear work gloves for your safety during the installation process. Be sure to verify the compatibility with your dishwasher’s model number, as similar-looking parts may have slight variations in size or design.

This heating element is a genuine OEM replacement sourced directly from the original manufacturer for use in various models of dishwashers. The element is designed to heat water inside the dishwasher during the wash and rinse cycles to enhance the efficiency of the cleaning process. It is positioned at the bottom of the dishwasher tub, be...Read moreneath the lower rack. The heating element includes a bushing, which is a protective covering that prevents water from coming into contact with the electric terminals, and two plastic nuts.

This dishwasher manifold, also known as the top dishrack tube hanger, is a genuine OEM replacement part designed to direct water to the spray arms and support smooth upper rack movement. It attaches to the bottom of the upper dishrack, allowing water to flow from the pump for thorough cleaning. Made from durable plastic, this component of...Read moreten requires replacement when cracks or mineral buildup occur, leading to poor washing performance or a jammed rack. Installation is simple and helps restore even water distribution and proper rack function, ensuring your dishwasher operates efficiently.

We're here to help you get your cooktop working perfectly again with the GE Spark Ignition Switch and Harness. This essential component is explicitly designed for cooktops, and it covers all the challenges you face with your surface burners. This assembly is more than a simple part?it's a comprehensive solution, containing both igniter s...Read morewitches and a full wire harness. Its main job? Ensuring your appliance lights up quickly and efficiently, every time you're ready to whip up a meal. Safety is top priority, so remember to disconnect your cooktop from its power source before getting started with the installation. This simple step guarantees your peace of mind while you're working. Choosing this GE part ensures not just efficient, but also swift repairs to your cooktop. This is about more than just fixing an issue; it's about getting the dependability and precision you expect from your appliances. With the GE Spark Ignition Switch and Harness, you?re not just replacing a part, you?re upgrading your cooktop to work like new, revitalizing your kitchen experience with the very best in ignition spark technology from a trusted name in the industry.