KDFE454CSS2 KitchenAid Dishwasher - Parts

The adjuster cover goes on the outside of the adjuster housing. It is used to support the height adjuster and also protects the internal components of the adjuster housing.

Sold individually.

Sold individually.

Sold individually. This is a no flip dishrack clip.

This silverware basket is a genuine OEM replacement designed to securely hold utensils during the dishwasher cycle, ensuring thorough cleaning and preventing damage or loss. Constructed from durable dark gray plastic, it features a partitioned interior for organized storage and a removable handle for easy transport. Compatible with select...Read more models from Whirlpool, KitchenAid, Maytag, and Jenn-Air, this basket helps streamline post-wash sorting and supports optimal water flow around cutlery. Always verify model compatibility before purchase to ensure proper fit and function.

When you order this part it is recommended that you order the gaskets as well - search by model#.

This part is used to drain water from your dishwasher.

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be care...Read moreful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.

The tine row retainer for your dishwasher locks the tine row in the vertical position. If the tine row retainer is broken or missing, the tine row will not stand vertically, and it will not be effective. The tine row retainer is found on the lower dish rack and is connected to the side of the rack. To remove the retainer, disconnect the t...Read moreine row from the retainer, then use a flat blade screwdriver to disconnect the retainer from the dish rack. Then, simply snap the new retainer into place, and reconnect the tine row. This part is made of gray plastic and is sold individually.

This is a replacement cap for the detergent/rinse aid dispenser. If the rinse aid cap is damaged or missing, you may notice too much rinse aid in the dishwasher. The cap simply screws in to the dispenser, so if your cap is damaged you can simply screw it out, then screw in the new one. The rinse aid cap is approximately 2 inches in diamet...Read moreer and is sold individually. This is an OEM part, directly from the manufacturer.

This is a screen filter, designed to keep food particles, gunk, and debris from entering the pump of your dishwasher. If this filter is missing, damaged, or simply unusable, it will need to be replaced so you can effectively clean your dishes. Replacing this filter is simple, as you only need to twist and remove the lower filter, before y...Read moreou can carefully lift this filter out. This filter is an OEM part and is sold individually.

Sold individually.