All Installation Instructions for KitchenAid Dishwasher KDFE454CSS0

Roller mount broke Rack Adjuster

Took half hour to take off old Adjuster just trying to figure which things pop off putting on new one side 10 minute at the most

Parts Used:

Dishwasher Positioner

Dishwasher Dish Rack Adjuster Kit - Left and Right Side

Robert R from FOLSOM, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

6 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Rack tines were corroded

Took off the old wheels and placed them on the new rack - fast and easy if you watch the video.

Parts Used:

Lower Dishrack

J Kevin from Pittsburg, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

The old filter was warped, allowing food into the sprayer system

Replaced the strainer. This keeps the two sprayers clean/clear so they do not clog up. Dishes are cleaner now. Note : if your sprayers are clogged it is a long process to clear out the sprayers. Dishes will not be clean until your sprayers are all cleared.

Parts Used:

Screen

George from LYMAN, ME
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

TOP RACK END CLIP BROKE OFF

PULLED BROKEN CLIP OFF AND SQUEEZED NEW ONE IN. I HAD TO USE PLIERS TO SQUEEZE TOGTHER SINCE i AM 77 YEARS OLD AND HANDS ARE NOT THAT STRONG ANY MORE. I HAD ALSO WATCHED THE INTERNET VIDEO TO MAKE SURE I COULD HANDLE THIS CORRECTLY. 10 MINUTES MAX TO UNLOAD TOP RACK AND PUT TOGETHER.

Parts Used:

Rack Stop Clip

Sonya from YOUNGSTOWN, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

The filter came out and pushed the arm up on the burner and melted it.

The air just unscrews with one twist and the new arm twist right back on. No tools needs. Saved me $100 service call.

Parts Used:

Dishwasher Lower Spray Arm

Sherry from SUSANVILLE, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

The rinse aid cap came off and melted in the bottom of the dishwasher.

Screwed the cap on to the rinse aid receptacle.

Parts Used:

Dishwasher Rinse Aid Cap

Bonnie from ETTERS, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Split tine row

Removed broken tin row. Replaced with new tine row. Tokk less than 1 minute.

Parts Used:

Tine Row

Janet from MIDDLEBORO, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Water filter needed replacing

The old filter simply unscrews and the new one screws in.

Parts Used:

Dishwasher Filter

Martha from SAN DIEGO, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Wheels fell off

These wheel assembly that came on the lower rack of my dishwasher were junk! They started falling off within 6 months. I put them back on to the point that the pin in the center of the wheels would no long stay in place, thus the frustrating situation of the wheels falling off often.

Assembly was easy peasy!

Parts Used:

Lower Dishrack Wheel

Jan B. from BEAVER, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Replaced wheels on lower rack

My husband did the repair. It was very easy. He basically just popped off the old wheels and popped on the new ones.

Parts Used:

Lower Dishrack Wheel

Jane from JOLIET, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

two retainers broke and the main part fell apart

pushed the new retainers in the holes and we are set to go

Parts Used:

Dishwasher Push-In Retainer Clip

Lois from Great Falls, MT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

door leaks bottom right

leveled dishwasher, it was leaning forward, raised front 1/2'", to get level.
no More leaks, WOULD LIKE TO RETURN DOOR SEAL. DID NOT USE SEAL.

THANKS,
PETE GODSHALK

Parts Used:

Dishwasher Seal

Peter from LEBANON, NJ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Original door balance cord broke on one side

pulled the dishwasher out (took the most time-1 hour) and 30 min. to install new door balance kit and springs. Replace both sides while the unit was out.

Parts Used:

Dishwasher Door Spring

Door Balance Link Kit

Jerry from BOALSBURG, PA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Dishwasher was making a moaning sound when draining.

Unplug dishwasher. Remove lower front accessible panel. Disconnect wires to the drain pump. Rotate pump to unlock and remove. Apply plumbers grease to rubber seal and install new pump. Connect wires. Plug in dishwasher and run rinse cycle to check for no water leak. If all okay replace access panel. Done.

Parts Used: