My Orders
KD2 - Overview
Models starting with KD2
Click on the best match to narrow your results.
- KD200 KitchenAid Food Waste Disposer
- KD220GDD1 Frigidaire Range (30" Electric, Drop-in)
- KD220GDD2 Frigidaire Range (Electric)
- KD220GDD3 Frigidaire Range (Electric)
- KD220GDF1 Frigidaire Range (30" Electric, Drop-in)
- KD220GDH1 Frigidaire Range (30" Electric, Drop-in)
- KD220GDH2 Frigidaire Range (Electric)
- KD220GDH3 Frigidaire Range (Electric)
- KD220GDV1 Frigidaire Range (30" Electric, Drop-in)
- KD220GDW1 Frigidaire Range (30" Electric, Drop-in)
- KD220GDW2 Frigidaire Range (Electric)
- KD220GDW3 Frigidaire Range (Electric)
- KD220SWBA1RC1 Midea Dehumidifier (Midea 22 Pint Portable Dehumidifier Kd220swba1rc1)
- KD22MTWBA1RCM Midea Dehumidifier (Midea Koolking Dehumidifier Kd22mtwba1rcm)
- KD231ADD-2 Frigidaire Range (Frigidaire Range/Stove/Oven Model KD231ADD-2 (KD231ADD2, KD231ADD 2) Parts)
- KD231ADF-2 Frigidaire Range (Frigidaire Range/Stove/Oven Model KD231ADF-2 (KD231ADF2, KD231ADF 2) Parts)
- KD231ADH-2 Frigidaire Range (Frigidaire Range/Stove/Oven Model KD231ADH-2 (KD231ADH2, KD231ADH 2) Parts)
- KD231ADV-2 Frigidaire Range (Frigidaire Range/Stove/Oven Model KD231ADV-2 (KD231ADV2, KD231ADV 2) Parts)
- KD2661 KitchenAid Mixer
- KD2661-3 KitchenAid Mixer
- KD2661KATRW KitchenAid Mixer (MIXER)
- KD2661X KitchenAid Mixer (6 Qt. Stand Mixer)
- KD2661XMC3 Whirlpool Mixer
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$14.25
On Order
Drip Bowl - 8"
Part #316048413
This chrome drip bowl is designed for use with electric cooktops and ranges. This drip bowl is sold individually. At the widest point this part has a diameter of approximately 10 inches. It sits beneath the surface burner element. It catches any drips or spills coming from the cookware on your burner. Because the cooktop is a high-traffic...Read more area of the kitchen, these bowls often get damaged, or get so dirty they can no longer be adequately cleaned. When replacing this part you need to remove the burner element. While you have it out we recommend inspecting the terminals and the element for any corrosion, arcing, or discoloration. Any of those things could be a sign of a bigger problem, and it indicates that the element and terminal block should be replaced.
Read less
$13.15
In Stock
Chrome Drip Bowl - 6"
Part #316048414
The drip bowl catches grease and spills that come from cooking on your stove top. They are located under the heating elements. Drip bowls are often neglected and can become rusted and cracked. If your drip bowl is damaged, it could allow grease, food, or other spills to drip inside your range. This could become a fire hazard. This 6 inch ...Read morechrome drip bowl fits most electric ranges. Before you replace your damaged drip bowl, make sure the element is turned off and cool to the touch. To replace the drip bowl, remove the element, replace the current drip bowl, and reattach the element. This part is sold individually.
Read less
$15.20
In Stock
Terminal Block Kit
Part #5303935058
This part connects the wire harness to the surface element and is used for ranges. The kit includes interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing, and wires. If your range/oven is having symptoms such as burner not heating, heating elements not working, burning smell, or if the oven is making a buzzin...Read moreg noise then this could be the solution. The tools needed to replace the kit are wire strippers, a heat gun or hair dryer, and #1 square heard screw driver. Refer to the installation/instructional video for further guidance to accurately replace the element.
Read less
$6.40
In Stock
Dryer Retaining Ring
Part #WP9703438
This part is a retaining ring, sometimes called a retaining clip, that holds the drum support roller onto the shaft of a dryer. It is made entirely of metal and measures less than an inch in diameter. The retaining ring is a genuine OEM part sourced directly from the manufacturer. The ring may vary in appearance due to manufacturer substi...Read moretution, but the function is the same. You may need to replace this part if the dryer is noisy during tumbling, will not tumble, or takes too long to dry. Be sure to check drum support roller kit and shaft before ordering parts.
Read less
$26.82
In Stock
Worm Following Gear
Part #W11086780
This gear is used to power your stand mixer. It is attached to the planetary shaft. The gear can become stripped over time or accumulate grease. You may need to replace other mechanical parts at the same time such as the worm gear and pinions. Make sure the mixer is unplugged before beginning this repair. Clear excess grease as you encounter it during this repair.
$40.65
In Stock
Bake Element - 240V
Part #5303051519
This heating element, used in any range/oven, is an open-style bake element. It is placed at the bottom of the oven and supplies heat. If your baking element does not supply consistent heat or is burnt out, then replacing the element is the solution to this problem. This heating element is a 19-1/4 inches wide by 15 inches long. The push-...Read moreon male spade terminals are 13-3/4 inches apart. The tools needed for this replacement are: a screwdriver and needle-nose pliers. The first step in is to unplug the range or shut off the house circuit breaker before starting. Unscrew the back of the oven cavity to pull out wires from the defective element. Reconnect wires to the new element and screw it back.
Read less
$62.84
In Stock
Surface Element - 8 Inch - 2600W
Part #316442301
The range surface element provides heat to the cooking surface on top of the range. The element has a universal plug, is 8 inches in diameter, spans 5 coils in width and reaches 2600 watts. Before you begin your repair, ensure that the elements are turned off and have had time to cool. Once you have removed the element this is a good time...Read more to ensure the terminal is in good condition (they can wear over time) which may need to be replaced as well. This quick repair requires no tools except gloves for safety, and a small amount of time.
Read less
$40.64
In Stock
Surface Element - 8 Inch - 220V
Part #316442300
If the burner element on your range will not heat up, or is damaged, it may need to be replaced. This part is 8 inches in diameter, and should not be confused with the smaller 6-inch model. The part is 220 Volts and 4 Turn. The burner element connects to the terminal block inside the range. To do this repair, simply remove the old surface...Read more element and replace it with the new part. This product is sold individually. As the surface element is hot when it is on, be sure to unplug the range from the power source before completing this repair.
Read less
$63.64
In Stock
Hub Gear
Part #W11192795
Includes both the attachment and beveled gear. This worm follower gear is for stand mixers.
Worm follower gear meshes with the worm gear, causing the rotation of the planetary assembly where the accessories attached.
Unplug the mixer before installing this part. Wear work gloves to protect your hands.
$27.45
In Stock
Light Bulb
Part #316538904
This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If the existing bulb is broken in the socket, disconnect the power to the refrigerator and use a pair of needle nose pliers to grip the intern...Read moreal fragments of the bulb to unscrew. Replace with the new bulb and reconnect the power to the refrigerator. These bulbs are sold individually and are a commonly replaced part; consider ordering a spare.
Read less
$37.35
In Stock
Surface Element - 6 Inch
Part #318372210
This part is sold individually. This is a part for your stove top. The surface element is what your cookware sits on. The element supplies heat at varying temperatures. This may need to be replaced if the coil has shorted out or the terminal block shorted, and this caused the connectors at the end to burn out. The element is set in place ...Read moreby springs. You will need to push the springs in to release the old element. Make sure the drip bowl is lined up with the terminal block and press the new element into place.
Read less
$54.24
In Stock
Mixer Worm Gear
Part #WP9709231
This durable metal worm gear is designed to rotate the planetary assembly in select stand mixers, enabling smooth and consistent operation of attached accessories. As a key internal component, it helps drive the mixing action and ensures reliable performance. If your mixer is unresponsive, making unusual noises, or slipping during use, a ...Read moreworn or damaged gear may be the cause. Replacing this part can restore proper function and extend the life of your appliance.
Read less
Common Symptoms of models starting with KD2
How this model fails, and the parts that fix it.
Element will not heat
Fixed by
these parts
these parts
Show All
Little to no heat when baking
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Oven not heating evenly
Fixed by
these parts
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
these parts
Show All
Oven is too hot
Fixed by
these parts
these parts
Show All
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More