This tray rotates in your microwave ensuring more even temperatures. It is used to hold containers and plates of food or beverages that you heat up inside of the appliance. If you notice that the tray is no longer able to turn on its own or has broken, it may need to be replaced. This part is made of clear glass and is approximately 13 in...Read moreches in diameter and weighs approximately 3.504 lbs. There are no tools required to complete this repair. Simply place the turntable tray on top of the turning device in your microwave and dispose of the old plate.
In your microwave, the diode allows current to flow one-way only, converting alternating current to direct current. If you notice that your microwave does not heat properly, you may need to replace the diode. This product is approximately 3 inches in length. Before completing this repair, be sure to disconnect the power source from the mi...Read morecrowave. The diode is located inside the main compartment of the microwave, so you will need to open it up before you can complete this repair. This is an OEM part sourced directly from the manufacturer. Many of our customers have rated this repair as easy.
This part is a genuine manufacturer door interlock switch kit, also known as primary micro switch or microwave switch kit, for a microwave. The function of this part is to sense when the door of the microwave is open or closed. If the part is defective, the microwave will not start or will start when door is open. This kit contains two 15...Read more Amp, 125/250 Volt switches with 3/16 inch terminals. Be sure to disconnect power to microwave before replacing part. Use extreme caution when replacing microwave parts, as high-voltage capacitors can retain an electrical charge when unplugged. NOTE: This kit includes 2 single pole, double throw (SPDT) micro switches. As per the manufacture for the secondary interlock switch order part # 56001100.
This screw is for microwaves.
A qualified technician should install this part if it requires accessing internal components of the microwave or microwave door. High-voltage capacitors can retain a lethal electrical charge even when the microwave is unplugged, and door shielding components should be tested for leaks after all door repairs. This screw is sold individually.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
I dropped and broke the glass cooking tray
471 of 475 peoplefound this instruction helpful.
Tami from Quincy, IL
Really Easy
Less than 15 mins
After shopping all over town trying to find a new tray I discovered PartSelect.com, I called and ordered the tray and received it the next afternoon. It couldn't have gone smoother.
Was this helpful?
Thank you for voting!
Cooking Glass Tray was broken
366 of 376 peoplefound this instruction helpful.
Charles from Newark, DE
Really Easy
Less than 15 mins
EXCEPTIONAL service! WOW! Order it Thursday online and it arrived Saturday. I will definitely use your service again. Thank you again!!
Mr. & Mrs. Charles
Was this helpful?
Thank you for voting!
microwave door stuck....wont open
80 of 101 peoplefound this instruction helpful.
Sailendra from Round Rock, TX
Really Easy
30 - 60 mins
Screw drivers
The reason the door would not open upon pressing the door opener is because the BRCKT-LATCH was broken. I discovered that after opening the microwave enclosing. The BRCKT-LATCH has two ends sticking out....each fits into a hole. One of the ends on the LATCH was broken and therefore it was not tightly fit. No upon pushing the door opener t
... Read morehe LATCH would not function properly since it was loosely fit and hence the door would not open. To Fix this issue: 1) Buy a new BRCKT-LATCH 2) Remove the microwave enclosing. I had to use a special screwdriver, since the screws were security protected on my microwave. After removing the case, I opened the door by manually pressing the door latch upwards (please make sure that the microwave is not connected to the electric socket before removing the enclosing). 3) pull out the old LATCH from the microwave. 4) carefully insert the new LATCH. Try not to put too much pressure when trying to fit the latch, or else the ends may snap again!! 5) Close the door and try opening it by pressing the door opener. it should work now!!