KCMS135GBT0 KitchenAid Microwave - Overview

Diagrams for KCMS135GBT0

See every part. Know exactly what you need.

Parts for the KCMS135GBT0

Fastener Screw

Part #8169475

Sold individually.

$53.20

Glass Carousel Tray

★★★★★

(7)

Part #WPW10267856

This tray rotates in your microwave ensuring more even temperatures.

$89.70

Door Interlock Switch Kit

★★★★★

(3)

Part #4392027

This part is a genuine manufacturer door interlock switch kit, also known as primary micro switch or microwave switch kit, for a microwave. The function of this part is to sense when the door of the microwave is open or closed. If the part is defective, the microwave will not start or will start when door is open. This kit contains two 15...Read more

Read less

$21.45

SCREW

Part #W11380570

Sold individually. For white and almond models.

Turntable Roller Guide

Part #WP8205178

This roller is located underneath the glass turntable. With the help of the motor, this roller helps to rotate the glass tray. This part takes the place of the coupling.

$9.62

Microwave Wave Guide Rivet

Part #WP4359508

This rivet is used for the stirrer cover/wave guide. They are sold individually.

Microwave Spring

Part #WP4158178

Door open button spring.

$7.47

Dryer Screw

Part #W10815455

This tapping screw is sold individually.

$47.40

Microwave High Voltage Diode Wire

Part #WP8205489

This part allows power to go only one way.

$19.30

Microwave Line Fuse

★★★★★

(1)

Part #WP8183507

SCREW

Part #8169474

Sold individually.

Wave Guide Cover

Part #4359777

This part guides the waves to the inside of the microwave to cook your food.

Common Symptoms of the KCMS135GBT0

How this model fails, and the parts that fix it.

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Microwave worked intermittently depending on how door was closed

67 of 85 people found this instruction helpful.

Robert from Bainbridge Island, WA
A Bit Difficult
30 - 60 mins
Pliers, Screw drivers

Remove top grille (2 screws), undo control panel (1 screw). Tilt down control panel, switches are on the left. There are actually three switches that are involved with the door, two horizontally mounted, one vertically mounted. This would be an EASY REPAIR, but it took me a while to figure out which of the three switches was bad, and a ... Read more

Read less

Was this helpful?

No Power to Microwave

42 of 89 people found this instruction helpful.

John from Palos Hills, IL
Really Easy
Less than 15 mins
Screw drivers

After determined the problem on one of the websites...I received the part I needed... removed the control panel and installed the new main fuse In about 15 mins!

Was this helpful?

Close the door on the microwave, punch in the # nothing happened

15 of 23 people found this instruction helpful.

Robert S. from Stafford, TX
Really Easy
15 - 30 mins
Screw drivers

I removed the unit from the wall. Took the cover off. Set the unit on its side. It revealed the working parts. Removed the old micro switches. Put in the new oness. Presto, it worked. Very easy for me.
The parts was delivered almost before my notice they were shipped.

Was this helpful?