KBL27C (A2) Kawasaki Trimmer - Overview

The Fuel Tank Grommet is a 1-inch, black, rubber part. It attaches to the fuel tank so you can run your fuel lines through it, and is rated as "Easy" to install by most of our customers. If worn or damaged, it will begin to leak fuel, and must be replaced. Refer to your make, model and diagrams to ensure you're choosing the right part.

The Primer, or priming pump, is a plastic part that attaches to the carburetor. It's rated as "Easy" to install by most of our customers. This part is used to pump fuel from the fuel tank to the carburetor or to start the engine. If damaged, it will no longer pump fuel. It may also be physically, noticably broken. Replace this part if dam...Read moreaged. Check your make, model and diagrams to ensure you're choosing the right part.

The fuel filter clamp, is a silver, individually sold, metal part, used to secure the fuel line to the fuel filter. It attaches to the fuel filter and if broken, typically due to fatigue or damage, it should replaced. Installation is rated as "Easy" and requires Pliers and a Screwdriver. When removing the fuel line to remove the old clamp...Read more, make sure you have a bucket to catch the fuel. Refer to your make, model, and diagram to ensure you're choosing the right part.

This 2-cycle in-tank fuel filter is a component in your lawn equipment that ensures clean fuel reaches the engine by filtering out impurities and debris. It is made of durable metal and high-quality felt and is typically located in the fuel lines. A clogged or cracked filter can cause engine sputtering and idling issues, leading to fuel f...Read morelow problems and potential engine damage. Additionally, impurities in the fuel can damage the engine. To install a new filter, first turn your machine off and allow the engine to cool. Use pliers or a wrench to disconnect the fuel lines. Slide out the old fuel filter, taking care to remove any mounting brackets or holders if necessary. This authentic OEM filter is sold individually.

A cutter reel, also known as a line or trimmer head, is a component that is necessary within the cutting head of a trimmer, since it supplies the trimmer with line/spool. This part is made of plastic and is an OEM part that measures approximately 4.2-inches in diameter and has 2 lanes for spool storage. Since this part is made of plastic,...Read more it can break or crack from a drop impact, or simply over time and exposure to gasoline, oil and heat. If you find that the spool is not coming out properly, or too much spool is being used at once, this part may need replacing. Replacing this part is as simple as opening the trimmer head and accessing where the spool is housed, removing the previous reel, and replacing it with the new one. This part is sold as an individual part without any securing hardware and is compatible with various makes and models of trimmer.

This cutter head assembly, also known as the trimmer head assembly or bump and feed cutting head, is sourced from the original manufacturer, and guaranteed to fit your trimmer. It consists of the cutting head, which is the main body of the assembly that holds the cutting components and connects to the trimmer shaft; the cutter line/cord, ...Read morewhich is a durable nylon string that rotates to cut through materials; a spool, which holds and advances the cutter cord; and a cutting guard, which provides a protective shield or cover that surrounds the cutter cord. The arbor has a diameter of 8mm and left-handed threads with a pitch of 1.25. The head can hold 20 inches of a 0.95-inch diameter cutter line. The cutter head assembly can fail due to mechanical damage to the body, worn-out or tangled strings, or a faulty spool, causing the trimmer to lose its cutting ability. To remove the head assembly, simply twist it off the trimmer shaft. Remove any dirt or debris that may be built up on the shaft and twist the new assembly on the shaft.

This Tube or Fuel Line is a rubber tube used to deliver fuel from the tank to the carburetor. It measures 3 X 5 X 174mm, and installation is rated as "Easy" and requires just a pair of pliers. Over time, the fuel line can become cracked or frayed, leaking fuel and posing risk to your equipment as well as fire risks.

This is an authentic Kawasaki replacement part manufactured for use with outdoor power equipment. The special tube is commonly used to return fuel to the fuel tank when purging the carburetor. This tube is available as an individual replacement part, please see model diagram for associative parts.

This is a genuine OEM supplied replacement part that is designed for use with Kawasaki lawn and garden equipment. It is utilized to keep the fuel in the tank. It includes a retainer that remains in the tank to keep the fuel cap from being lost or falling on the ground. One durable plastic fuel cap is included per order.

A recoil spring, also known as a recoil starter spring, is a tightly wound spring that is designed to be pulled and used within startup mechanisms of various models of outdoor power equipment, such as trimmers, edgers and leaf blowers. The spring is one part of a whole system, including a pulley and spool which is what a user will pull, b...Read moreefore the recoil spring retracts it. This recoil spring is compatible with various makes and types of power equipment, and is sold as an individual OEM part, without any other hardware. This spring measures approximately 3/4-inch when wound and is made of high-quality metal. If you notice that your starter mechanism is not retracting properly, or does not have enough tension on it, the spring may be worn out or broken, which can happen over time and through normal wear and tear. Depending on your equipment, the replacement process will look different for this spring, so reference your user manual for the exact location.

This is an authentic item that is supplied by the original equipment manufacturer for use with Kawasaki engines commonly installed on lawn and garden equipment. It is one of the special diaphragms that ensure an air-tight seal in the carburetor, please make sure to refer the appropriate diagrams of your model for the correct location and ...Read moreapplication of this hardware. Unfortunately, over time gaskets and diaphragms tend to wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality component is made of durable composite material and is sold individually.

This is a genuine OEM sourced replacement part that is specially designed for use with Kawasaki lawn and garden equipment. It is a standard hardware that has multiple applications depending on your model, make sure to check appropriate diagrams for correct location and use of this hardware. This part is made from durable metal and it is sold individually.