Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
needed a Door Bin to replace the old one
6 of 11 peoplefound this instruction helpful.
Susan from BLOOMINGTON, IN
Easy
Less than 15 mins
just pop the old one out popped the new one in its replace.
Was this helpful?
Thank you for voting!
the rail to hold the crisper drawers broke
4 of 5 peoplefound this instruction helpful.
Christina from Orange, CT
Really Easy
Less than 15 mins
I first removed the bottom shelf. Then I popped the rail in. It was pretty easy although I did have to use some force to fit it in. Ordering the part and doing it myself was a lot cheaper than calling the repair man.
Was this helpful?
Thank you for voting!
Center crisper rail breaking off.
4 of 5 peoplefound this instruction helpful.
John from CRESCO, PA
Really Easy
Less than 15 mins
After the original center crisper drawer slide rail broke and and second also looking in deep into your parts catalog I discovered that the refrigerator never came with a crisper frame brace from the store or factory. Thanks to you , I no longer have the use of the center rail breaking off for now everything is made out of cheaply m
... Read moreake plastic by whirlpool.
Simply cut the water tube on both sides of connector and push in the new one.
Was this helpful?
Thank you for voting!
One of the light bulbs went out on my Whirlpool refrigerator.
4 of 5 peoplefound this instruction helpful.
Brian from LAKE CHARLES, LA
Very Easy
Less than 15 mins
Screw drivers
I changed the bulb but it still didn’t work. I ordered a bulb holder and replaced it and it works properly now. It was an easy repair, remove the bulb, gently pry the bulb holder out with a screwdriver and snap the new one in.
It was useful that under the description of the part in the catalog, it showed that this part was oft
... Read moreen used to repair this issue. The service was great and the delivery was fast.
Read less
Was this helpful?
Thank you for voting!
The pantry lid broke and was repaired a few times until the glue did not stick anymore
4 of 5 peoplefound this instruction helpful.
Gay from HUNTINGTON, NY
Very Easy
Less than 15 mins
Very easy-slightly bend the end piece to fit over the peg.
Was this helpful?
Thank you for voting!
Broke the Rocker Switch in Fridge side
4 of 6 peoplefound this instruction helpful.
Sung-Su from BISMARCK, ND
Very Easy
Less than 15 mins
Popped out with butter knife and unplugged 3 prong connector and reversed with anew switch.
But, unfortunately it got broken again exactly same way as before. So, I ordered same switch again for 2nd time.
Maytag should recall that Rocker Switch and build with better materials.
Was this helpful?
Thank you for voting!
The rubber liner around the refrigerator door was splitting and cracking
3 of 3 peoplefound this instruction helpful.
Judy from BALD KNOB, AR
Very Easy
Less than 15 mins
I watched the video and it took away my trepidation. I did what it said and it went right in!!
Was this helpful?
Thank you for voting!
One of the plastic fasteners had broken so the entire part needed replacing.
3 of 3 peoplefound this instruction helpful.
lane from EVERETT, WA
Very Easy
Less than 15 mins
Socket set
Turned off power, Removed screw, disconnected wire harness and removed old rail from door, Connected new wire harness and attached new rail to door, replaced screw. Restored power. Done.
Was this helpful?
Thank you for voting!
There’s moisture inside the refrigerator and there’s a section in the gasket that was broken.
3 of 3 peoplefound this instruction helpful.
Rodolfo from SAN LEANDRO, CA
Really Easy
Less than 15 mins
Easily pulled out the gaskets off the refrigerator doors and replaced them with the new ones. The installation video was also a big help in the process.
Was this helpful?
Thank you for voting!
Freezer freezing up. Frost everywhere.
3 of 3 peoplefound this instruction helpful.
Daniel from LAKE CITY, FL
Very Easy
Less than 15 mins
Old gasket pulled of easily with no tools. New gasket was placed on floor and heated with blow dryer to straighten. Then installed new gasket by pressing in with my hands. Noticed that the old gasket was hard and not flexible. All was great. Fit perfectly. No frost after a week. Happy.
Was this helpful?
Thank you for voting!
Right door seal was torn at top of door
3 of 3 peoplefound this instruction helpful.
Richard from MIDDLETOWN, MD
Really Easy
Less than 15 mins
I followed the remove and replace instructions in the Part Sect video when I ordered the seal. Pulled out the old seal by hand and installed the new seal. No tools needed, very easy. Took 10 minutes at most.
Was this helpful?
Thank you for voting!
Original door gasket was cracked and torn
3 of 3 peoplefound this instruction helpful.
Sharon from RACINE, WI
Very Easy
Less than 15 mins
Replacement gasket extremely easy to install. Used hair dryer to soften and straighten out “kinks” in replacement gasket. Pulled old gasket out of groove in refrigerator door. Lined up corners of new gasket and pressed into place with my fingers. Went in exactly as video showed.
Was this helpful?
Thank you for voting!
rubber seal for right hand doors separated and allowed magnetic strip to fall out
3 of 3 peoplefound this instruction helpful.
Gary from YUMA, AZ
Very Easy
Less than 15 mins
Received gasket. Checked color and size. Because this unit is 33 inches wide one door is 3 inches narrower than the other. Removed shelves from door to provide more room to work. Took 15 seconds to pull out old seal and 1 minute to install the new one. Checked to make sure center sealing flap were on the center side of door. Started in up
... Read moreper corners, worked my way around the perimeter pressing in in with my fingers. Took longer to R&R and wash shelves than to replace door seal. VERY EASY
My Orders
