K532-13131A Kohler Engine - Overview

This oil seal is a genuine OEM replacement part designed for lawn and garden equipment. It is a small, circular rubber seal with a diameter of 2 3/8 inches, used to prevent oil leakage between the gear cover and gear shaft, and prevent the entry of contaminants. You will need to replace this oil seal if it is brittle, cracked, or has lost...Read more elasticity. A faulty seal will cause the gears to lose lubrication, increase friction damage, and prematurely wear down the parts. Remember to drain the oil from your equipment before beginning any repairs. Carefully pry the old seal from its mounting position and clear off any debris and residue on the area. Place the new seal in position and ensure it is securely fitted.

This OEM part is sold individually and is a direct replacement part sourced from the manufacturer. The Woodruff Key is used to allow mating parts such as a shaft and gear to rotate together. It is made of silver-colored metal and is found in various locations, depending on your model. This part will wear over time and needs to be replace...Read mored when damaged, worn, or if the mating parts no longer rotate together. Customers rate this repair as Easy.

This is a genuine OEM sourced replacement part which is supplied for use with Kohler engines commonly installed on lawn and garden equipment. It is used to provide an air-tight seal for the cover, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Over time gaskets t...Read moreend to wear out and crack eventually requiring replacement to maintain a proper seal. It is a high-quality component which is made of durable composite material and is sold individually.

This woodruff key, also known as a half-moon key due to its shape, is compatible with several different makes and models of small engine lawn equipment and is sold as an individual part. This key measures 1/2-inch in length and 1/8-inch in diameter and is made of high-quality metal. If you find excessive or strange noises, vibration, or l...Read moreoss of performance when starting your equipment, the key may be damaged and responsible. This key aligns the flywheel, camshaft and cam gear, all of which are used to maintain momentum and drive the engine, and this woodruff key plays an important role in that. You will need a wrench and/or screwdriver to replace the key, but you must first disconnect the spark plug. Gain access to the key by removing the flywheel nut and flywheel, then remove the key and clean the keyway, before installing the new key and the rest of the assembly.

Breaker (Points) When Installing 47 150 03-S breaker on engines below Serial #13007371, always use new push rod 41 411 01-S

It is an authentic manufacturer sourced replacement part designed for use with Kohler engines. This carburetor gasket provides an air tight seal between the carburetor and the insulator. Over time gaskets tend to deteriorate and crack eventually requiring replacement. It is made from high quality composite material and it is sold individually.

This is an authentic replacement part manufactured for use with Kohler small engines. The bowl gasket is used to seal the connection between the carburetor body and the float bowl. It is recommended to replace gaskets when servicing or rebuilding the carburetor to ensure good seals when the parts are reassembled. This bowl gasket is available as an individual replacement part.

Hose clamp. This clamp replaces 25 237 14-S

This is available as a kit. The carburetor repair kit items attach to various different parts and are made of rubber and metal. A wrench set may be necessary during the installation of these parts. They will require replacing if they become broken. These are genuine replacement parts sourced from the original manufacturer for use with engines and generators made by Kohler.

This is an original Kohler replacement part sourced directly from the manufacturer. The gasket-air cleaner is made of a cardboard composite, and is designed for use in over 150 small lawn and garden engines. This part is most often fitted between the elbow gasket and the air cleaner base. Please refer to engine manual for specific repair ...Read moreinstructions. This part is sold individually. A screwdriver may be necessary in making the proper removal and replacement.