K482-35224 Kohler Engine - Overview

This oil seal is a genuine OEM replacement part designed for lawn and garden equipment. It is a small, circular rubber seal with a diameter of 2 3/8 inches, used to prevent oil leakage between the gear cover and gear shaft, and prevent the entry of contaminants. You will need to replace this oil seal if it is brittle, cracked, or has lost...Read more elasticity. A faulty seal will cause the gears to lose lubrication, increase friction damage, and prematurely wear down the parts. Remember to drain the oil from your equipment before beginning any repairs. Carefully pry the old seal from its mounting position and clear off any debris and residue on the area. Place the new seal in position and ensure it is securely fitted.

This OEM part is sold individually and is a direct replacement part sourced from the manufacturer. The Woodruff Key is used to allow mating parts such as a shaft and gear to rotate together. It is made of silver-colored metal and is found in various locations, depending on your model. This part will wear over time and needs to be replace...Read mored when damaged, worn, or if the mating parts no longer rotate together. Customers rate this repair as Easy.

This stator kit (15 amp) is an OEM part direct from Kohler. Composed of metal, wiring and protective plastic, the kit is made for use with many small engines. This component provides the necessary voltage for charging the motor battery. A wrench and a pair of pliers are helpful for making the installation. Please refer to the manual for additional repair instructions.

This is a genuine OEM sourced replacement part which is supplied for use with Kohler engines commonly installed on lawn and garden equipment. It is used to provide an air-tight seal for the cover, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Over time gaskets t...Read moreend to wear out and crack eventually requiring replacement to maintain a proper seal. It is a high-quality component which is made of durable composite material and is sold individually.

Breaker (Points) When Installing 47 150 03-S breaker on engines below Serial #13007371, always use new push rod 41 411 01-S

This is an authentic OEM sourced part that is intended to be used with lawnmower engines from MTD and Kohler. The filter kit attaches to the intake housing assembly. This item is used to prevent dust and debris from entering the engine's intake. The kit includes the foam pre-filter and the main air filter. This kit is priced as a single item.

This is an original Kohler replacement part sourced directly from the manufacturer. The gasket-air cleaner is made of a cardboard composite, and is designed for use in over 150 small lawn and garden engines. This part is most often fitted between the elbow gasket and the air cleaner base. Please refer to engine manual for specific repair ...Read moreinstructions. This part is sold individually. A screwdriver may be necessary in making the proper removal and replacement.