K301-475 Kohler Engine - Overview

This manufacturer-supplied replacement part is designed for use with Kohler engines commonly installed on lawn and garden equipment. The bushing helps to secure the throttle linkage. It provides an identical replacement for a missing or a faulty hardware that was installed on a new unit. Please refer to the appropriate diagrams of your mo...Read moredel for the exact location and the correct installation of this part. Keep in mind this high-quality bushing is made of durable plastic and is sold individually. You will need a wrench set to remove the housing in order to gain access to the bushing.

This stator kit (15 amp) is an OEM part direct from Kohler. Composed of metal, wiring and protective plastic, the kit is made for use with many small engines. This component provides the necessary voltage for charging the motor battery. A wrench and a pair of pliers are helpful for making the installation. Please refer to the manual for additional repair instructions.

This item is available as an individual replacement part. The retainer attaches to the intake valve and the exhaust valve. A set of pliers might be needed during the installation process. It is made of metal and will need to be replaced if it becomes broken. This is an authentic OEM sourced item which is specially produced for use with Kohler engines and generators.

This is a genuine OEM sourced replacement part which is supplied for use with Kohler engines commonly installed on lawn and garden equipment. It is used to provide an air-tight seal for the cover, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Over time gaskets t...Read moreend to wear out and crack eventually requiring replacement to maintain a proper seal. It is a high-quality component which is made of durable composite material and is sold individually.

This is an OEM part sourced directly from the manufacturer. The connector is commonly found in Kohler engines. This part is made of high-quality plastic, and is attached to the rectifier regulator to direct the path of wires that carry electrical signals. You may require a wrench when replacing this item. This product is available as an individual replacement part.

Breaker (Points) When Installing 47 150 03-S breaker on engines below Serial #13007371, always use new push rod 41 411 01-S

It is an authentic manufacturer sourced replacement part designed for use with Kohler engines. This carburetor gasket provides an air tight seal between the carburetor and the insulator. Over time gaskets tend to deteriorate and crack eventually requiring replacement. It is made from high quality composite material and it is sold individually.

This is an identical replacement for a missing or worn gasket that is generally utilized to provide an air-tight seal for the breather plate, make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Over time the material will begin to get compressed and it may crack eventuall...Read morey requiring a replacement, keep in mind this high-quality gasket is sold individually.

The breather seal goes next to the air cleaner base. This part is available individually and is made of rubber. An allen wrench might be needed during the installation process. It will require replacing if it becomes broken. This part is an OEM from Kohler for use in engines and generators.

This is an authentic replacement part manufactured for use with Kohler small engines. The bowl gasket is used to seal the connection between the carburetor body and the float bowl. It is recommended to replace gaskets when servicing or rebuilding the carburetor to ensure good seals when the parts are reassembled. This bowl gasket is available as an individual replacement part.

Hose clamp. This clamp replaces 25 237 14-S