K23 - Overview

This OEM 10-Inch-long by 2-Inch-diameter slim white plastic in-line ice and water filter reduces odor, chlorine, and other chemicals without removing fluoride and its benefits. It also prevents lime scale buildup, which can be harmful to icemakers. It can be used on most brands of refrigerator that have a water filter that is housed in th...Read moree interior part in the back of the appliance. This package includes the filter, brass adaptors, brass sleeves, and nuts. The built-in fitting connects directly to your quarter-Inch water supply line (shut off water supply before installing). It is compatible with either copper or plastic tubing. For optimal performance, the operating pressure should be a max of 125 PSI and the temperature should be 33-100 degrees Fahrenheit. To ensure clean drinking water and proper water flow, change filter every 6 months or 400 gallons.

This spill valve is for pressure washers. Spill valve opens when water flowing through the pump gets too hot, releasing the hot water in exchange for cooler water.

This OEM Grooved Ring is a 12 x 20 x 4/6 rubber ring which can be installed with a screwdriver and wrench set. Installation is rated as "Medium" difficulty. It attaches in the cylinder head and is used to keep the oil in the pump from mixing with the water. If broken it will leak and must be replaced.

Genuine Karcher replacement part, it is sold individually. This part along with the piston controls the flow of water through the pump assembly. This part has a tendency to wear out. It may be wise to keep a few extra on hand.

Genuine Karcher replacement part, this item is sold individually. This part acts as a seal to keep the oil in the reservoir and the water in the pump form contaminating each other. It is installed on the piston.

This is a high-quality pressure spring that is made for use with Karcher pressure washers. It is an authentic item that is supplied from the original manufacturer. The spring applies tension on the piston that helps to create pressure inside the cylinder. Over time it may wear out, get damaged or lost eventually requiring a replacement to...Read more maintain your pump. Refer to the owners manual and the diagrams of your model for the correct installation. Note, this pressure spring is made of durable metal and is sold as an individual item. To perform this repair you will need a screwdriver and a wrench set. Remove the cover and the cylinder head to gain access to the pressure spring.

This is a Genuine OEM Authorized replacement part used on Karcher Pressure Washers. This part is made out of Rubber Material and it is Sold Individually. This Washer fits on top of Grooved Ring and provides a seal. You would need a Set of Wrenches and Screwdriver to get take off the Cover and take apart the Pump.

This O-ring is a genuine part from original manufacturer. It is used with the cylinder head in Karcher pressure washers. An O-ring is a flexible circle which acts as a seal between rigid parts. It is a simple component but it is often essential for a machine to function correctly. Sold individually. Note that this ring is available with part # 9.001-104.0 Spare Parts Set.

This high quality wheel and tire assembly is a genuine manufacturer sourced replacement part that is specially produced for Karcher pressure washers. It is the wheel that supports and helps to move your unit around. This part consists of a durable metal wheel with a rubber tire and it is sold individually, please note the hardware to secure it is sold separately.

It is an OEM item which is made for Karcher pressure washers. This component provides an air-tight seal for the pump housing. Over time the material will wear out and it may begin to crack eventually requiring a replacement to prevent leaks. To ensure the correct installation of the new gasket, refer to the appropriate diagrams of your sp...Read moreecific model. Note, it is made of a durable material and is sold as an individual component. You will need a socket set to take the pump housing apart in order to perform this repair.

O-rings are flexible circles which are used to prevent leaks and maintain pressure. This part is an authentic OEM replacement ring used in Karcher pressure washers. These O-rings are used at the connection point between the machine and its hose. This set includes five (5) identical O-rings. Please note that the wand itself uses a separat...Read moree set of O-rings, part # 2.640-729.0 O-Ring Seal Set. Multiple other sizes of O-ring are used in various other spots on these machines; see manual for part numbers and placements.

This is a drain plug for different models of pressure washers. It is used to seal the check valve for the engine of the pressure washer and features an O-ring that can deteriorate over time. Failing to replace the drain plug can result in water leakage from the pump, potentially causing damage to the pump and surrounding parts, and leadin...Read moreg to pump overheating and seizing. To replace this drain plug, you will only need a few tools such as a screwdriver, Allen key, a set of pliers, and a utility knife. First, remove the pump from the pressure washer assembly using a screwdriver or Allen key. Then, disconnect the detergent hose by cutting it with a utility knife. Gain access to the valve(s), which may require you to use a screwdriver and/or hammer to remove the covering plate. Use a set of pliers to rotate and loosen the drain plug and remove it. Apply silicone grease to the new drain plug before installing and securing it. Reinstall the metal plate covering, reconnect the detergent hose to the pump, and reinstall the pump. Monitor your pressure washer for any leaks or other issues with the new drain plug installed.