This is the replacement charcoal filter for your microwave. It is silver and black in color and measures approximately 10 inches by 2 ½ inches. The charcoal filter removes cooking odors from the air ...
This is a genuine replacement 40 watt bulb for a microwave. The bulb is meant to light up the underside of the microwave or inside of your microwave when the door is open or during use. If your bulb i...
This part is a replacement handle support for your microwave door. The handle support is the part that connects the handle to the microwave door. Occasionally the handle supports can become loose and ...
This light socket is for your microwave and is designed to hold the light bulb. If the light bulb is not working, and the bulb has not burned out, it may be a problem with the light socket. This part ...
This turntable tray is for microwaves.
Turntable tray rotates in the center of the microwave to help ensure the food cooks evenly.
Follow the instructions in the owner's manual when installing this part.
Ask our experts a question about this model and we'll get back to you as soon as possible!
26 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank
February 21, 2020
How do you replace a handle support
For model number JVM3160DF4WW
Hello Frank,
Thank you for your question. You will need to remove the door lining to get access to the support, in order to remove the door lining so you can gain access to the screws holding the door handle in place, you will need to use a putty knife. Start at one side along the inside of the lining around the window edge and gently put the putty knife between the door lining and the door to release the tabs holding it place. The side where the door is hinged, you will need to pry the lining lose from the back side. Once this is complete you can remove the inner lining. With the lining removed you should see the screws holding the door in place. Sometimes the door handle may be held with 4 screws and you may not see the other 2 screws. If you remove the 2 screws and the handle does not come off you will need to remove the inner door frame with a putty knife using the same procedure as with the door lining so you can release the other screws. We hope this helps.
12 people found this helpful.
Was this helpful?
Thank you for voting!
Betty
January 7, 2020
Does this model come with the metal vent filters? I was told they are accessories by the dealer.
For model number JVM3160DF4WW
Hello Betty, thank you for your question. The filters for this unit are PartSelect Number: PS1022452. These filters go under the microwave. Please enter the part number into the site for current price and availability. Good luck with your repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Kim
September 18, 2021
I keep blowing the fuse when i open or shut door switches test good everything tested good i can test without digging deeper what do you think
For model number JVM3160DF4WW
Hello Kim, Thank you for your inquiry. If the fuse keeps blowing in your microwave and you've already tested the 3 door switches, we would next recommend checking the magnetron and the capacitor. For safety reasons, since the microwave capacitor can still store electricity even when the microwave is unplugged, it is usually advised that you discharge the capacitor before any attempt at repair. We have included a link on how to do so.
https://www.partselect.com/Microwave+discharge-capacitor+repair.htm
Good luck with your repair.
ON the underside of the oven are two screens. I have managed to pretty much destroy one of them. It measures 7.5" X 5"What is the part number so I may order it.
For model number JVM3160DF4WW
Hi Steven, thank you for reaching out. The part you are looking for is the grease filter, part number PS1022452. We hope this information is useful!
There was not a metal grease filter nor the charcoal filter with my GE microwave. Is this the way you ship them? How do I get these items?
For model number JVM3160DF4WW
Hello Charles, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS8746150 for the Charcoal Filter and PartSelect Number: PS1022452 for the Grease Filter. You can enter the part number into the website and there will be a add to cart button to proceed with the order and choose your shipping method. You can pay with Credit card or PayPal on the site. We hope this helps.
Open the front cover by pushing it at the top (where it says “Push”), lifting up and pushing back on top edge of the old filter. Pull it out. Installing the new one is basically just the reverse of those steps! That simple.
Old filter did seem to be a little thicker (filter material), but the new one was the exact same dimen
... Read moresions, so it went in properly. Wish the filter material was white, so you knew just how dirty it was actually getting. But... :-D
1. Unplug unit 2. Open door, remove two screws above the top trim piece, slide and remove trim. 3. Remove screw behind control board and top left corner, then release from position. 3b. Unplug all wire terminations and set control panel aside. 4. Remove two screws securing latch board, lift and rotate board
... Read moreout of position, remove three micro switches, xfer monitor switch actuator from lower pin in old board and insert in new. Install new door switches and reverse procedure to complete repair.
Note 1. Take care to located new latch board so holding tabs line up, pass through frame, and openings for door tangs line up with openings in frame before securing with screws.
