Models
>
JVM3160DF3BB
JVM3160DF3BB General Electric Range - Overview
Sections of the JVM3160DF3BB
[Viewing 4 of 4]Keep searches simple, eg. "belt" or "pump".
Charcoal Filter
PartSelect #: PS8746150
Manufacturer #: WB02X11550
This is the replacement charcoal filter for your microwave. It is silver and black in color and measures approximately 10 inches by 2 ½ inches. The charcoal filter removes cooking odors from the air ...
$22.91
In Stock
Light Bulb - 40W
PartSelect #: PS8767095
Manufacturer #: WB25X10030
This is a genuine replacement 40 watt bulb for a microwave. The bulb is meant to light up the underside of the microwave or inside of your microwave when the door is open or during use. If your bulb i...
$37.74
In Stock
Grease Filter
PartSelect #: PS1022452
Manufacturer #: WB06X10608
Sold individually. Most appliances require 2.
$66.05
In Stock
Light Socket
PartSelect #: PS8753748
Manufacturer #: WB06X10929
This light socket is for your microwave and is designed to hold the light bulb. If the light bulb is not working, and the bulb has not burned out, it may be a problem with the light socket. This part ...
$36.16
In Stock
Microwave Fuse
PartSelect #: PS3486694
Manufacturer #: WB27X11138
This fuse is for microwaves. Fuse protects the microwave from damage by shutting off the microwave if there's a power surge.
$57.94
In Stock
Microwave Glass Turntable Tray
PartSelect #: PS3486810
Manufacturer #: WB39X10032
This turntable tray is for microwaves.
Turntable tray rotates in the center of the microwave to help ensure the food cooks evenly.
Follow the instructions in the owner's manual when installing this part.
$149.53
In Stock
INCANDESCENT LAMP, 30W
PartSelect #: PS8767094
Manufacturer #: WB25X10029
Singlular Bulb
$27.57
In Stock
Questions And Answers for JVM3160DF3BB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michelle
February 27, 2020
The microwave stopped working with no power at all. What can it be?
For model number JVM3160DF3BB
Hello Michelle, Thank you for the question. In most cases it is caused by a blown Fuse, PartSelect Number PS3486694. To get to the fuse, remove the outer cabinet of the unit, which is usually held in place with a few screws. Once the outer cabinet is removed, follow the power cord into the unit. It will take you to the fuse holder, where the fuse sits. The fuse holder is located two or three inches into the unit, and may be attached to a power board. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Robert
November 29, 2019
I have a model jvm3160df3bb microwave. Fan and light all work, as does clock and time. But when we place an item inside and enter any time and press start it trips the breaker feeding the the microwave circuit. There is nothing else on the circuit. It is a 20 amp breaker designated circuit. Any clue what to check first?? I have tried plugging it into a different circuit. lowering the power level etc. is it a door switch or something on the main board?
For model number JVM3160DF3BB
Hi Robert, if you are certain it is not an overloaded circuit then a part on the microwave is drawing more power than needed. Basically parts that could be drawing power could cause this, the motor, thermostat ect; Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the JVM3160DF3BB
[Viewing 2 of 2]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
bulb burned out under the microwave that lights the cooktop underneath
got a screwdriver and opened the glass door over the light bulb - changed the bulb and put the glass door back with the screwdriver.
Parts Used:
-
Margaret from TOANO, VA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
27 of 48 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had to replace charcoal filter
Open the front cover by pushing it at the top (where it says “Push”), lifting up and pushing back on top edge of the old filter. Pull it out. Installing the new one is basically just the reverse of those steps! That simple.
Old filter did seem to be a little thicker (filter material), but the new one was the exact same dimen ... Read more sions, so it went in properly. Wish the filter material was white, so you knew just how dirty it was actually getting. But... :-D
Old filter did seem to be a little thicker (filter material), but the new one was the exact same dimen ... Read more sions, so it went in properly. Wish the filter material was white, so you knew just how dirty it was actually getting. But... :-D
Read less
Parts Used:
-
Jared from SIERRA VISTA, AZ
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
14 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tripping circuit breaker, broken micro switch locking pin
1. Unplug unit
2. Open door, remove two screws above the top trim piece, slide and remove trim.
3. Remove screw behind control board and top left corner, then release from position.
3b. Unplug all wire terminations and set control panel aside.
4. Remove two screws securing latch board, lift and rotate board ... Read more out of position, remove three micro switches, xfer monitor switch actuator from lower pin in old board and insert in new. Install new door switches and reverse procedure to complete repair.
Note 1. Take care to located new latch board so holding tabs line up, pass through frame, and openings for door tangs line up with openings in frame before securing with screws.
Note 2. A long magnetic screwdriver is helpful.
2. Open door, remove two screws above the top trim piece, slide and remove trim.
3. Remove screw behind control board and top left corner, then release from position.
3b. Unplug all wire terminations and set control panel aside.
4. Remove two screws securing latch board, lift and rotate board ... Read more out of position, remove three micro switches, xfer monitor switch actuator from lower pin in old board and insert in new. Install new door switches and reverse procedure to complete repair.
Note 1. Take care to located new latch board so holding tabs line up, pass through frame, and openings for door tangs line up with openings in frame before securing with screws.
Note 2. A long magnetic screwdriver is helpful.
Read less
Parts Used:
-
Charles from CLAYTON, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
11 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!