There are two different couplers (also known as a turntable shaft) that can be used for this tray - a male D-shaped shaft and a female D-shaped shaft. The couplers are sold separately.
Maintain a cleaner kitchen environment with this multi-layer aluminum microwave grease filter. Designed to effectively trap grease particles and reduce odors, it helps prevent buildup in the recirculation system, keeping your microwave running efficiently. Ideal for replacing worn or clogged filters, this part supports a fresher cooking experience and is easy to install.
The stirrer fan cover in your microwave can be found on the roof of the microwave. It protects the fan from damage and debris. This fan cover is made of white plastic and is approximately 7.5 inches in diameter. Occasionally, the stirrer fan cover can melt, and become damaged. If you smell burning from your microwave or notice damage, the...Read more fan cover should be replaced. The stirrer fan cover is sold individually, and is an OEM part directly from the manufacturer.
The rotating ring in your microwave rests under the microwave plate, and allows it to rotate when the microwave is running. It is a round plastic ring with 3 wheels spaced out around the perimeter. If your microwave plate or tray is not turning, you could have a broken or damaged rotating ring. This plastic ring is gray in color and is ap...Read moreproximately 10 inches in diameter. The 3 wheels are made of white plastic. This part is sold individually.
This is the replacement damper bracket for your microwave. It is made of plastic and is approximately 11 inches wide and 3 inches long. The damper bracket attaches to the outer cabinet and directs airflow through the vent duct. The main reason you would replace the damper bracket is if it is damaged and will not hold the damper in place p...Read moreroperly. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
This mounting plate, also known as a bracket, is crucial for keeping your microwave mounted to the wall, when placed above the stove. This OEM part is sold separately from the screws that are needed to hold it in place. You will need a screwdriver in order to secure the mounting bracket into place. Part has been substituted. Part is no lo...Read morenger a U-shaped bracket, it is now a flat mounting plate and will function the same.
This part is the replacement high-voltage diode for your microwave. It is approximately 3 inches long and is sold individually. The high voltage diode is an electrical current control device inside your microwave. Be sure to disconnect power to the microwave, and use extreme caution when completing this repair, as microwaves can still ret...Read moreain an electrical charge even when unplugged. This part is an authentic OEM part sourced directly from the manufacturer.
This is a replacement primary interlock door switch for your microwave. When the door is latched properly, the switch is actuated, and the microwave will operate. If your microwave will not start when the door is latched, you could have a faulty switch. The switch is black in color and has two metal terminals. It is approximately 1 inch l...Read moreong and ½ an inch wide. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rodger - For model number JVM1540SM5SS
October 12, 2023
On the example given elsewhere on this site, you give 1. Won't start; 2. Won't rotate; and 3. Won't heat.
I have two of the three, won't heat or rotate.
If one of the parts affects two of the three, would you call it that part? The part is the Primary interlock door switch.
Hello Rodger, thank you for reaching out to PartSelect. If any of the door switches fail, the microwave will not start or heat. To determine if any of the door switches are defective, use a multimeter to test each of the switches for continuity. If any of the door switches do not have continuity, replace it. Your model has 3 door switches. The door switch, part number PS2370055, is two in quantity, one on the top and one on the bottom. The door switch, part number PS2370056, is located in the middle of the latch board. We hope this information is useful!
Hello James, Thank you for contacting PartSelect.com. Very sorry but we do not have the wattage of the appliance, just parts lists and diagrams. For more specialized assistance or to speak with someone about this, we would suggest calling the manufacturer of the appliance directly. We hope this helps!
Was this helpful?
Thank you for voting!
Steve - For model number JVM1540SM5SS
February 17, 2023
My stir fan cover melted in two spots of the outer edge. Can I safely replace that cover?
Hello Steve, thank you for your question. Yes you can. the Cover is PS1480811. First, unplug the power cord, use a small flat-head screwdriver to pull out the plastic rivet pin, Rotate the old cover counter clockwise to removed lift out the blade assembly, install the new cover stirrer fan by first positioning the blade assembly then align the cover and rotate it clockwise to secure, then replace the mounting plastic rivet pin. We hope to hear from you soon
Was this helpful?
Thank you for voting!
Bob - For model number JVM1540SM5SS
January 16, 2024
Microwave is dead. Outlet works. Replaced 20 amp fuse. Still dead. What next?
Hello Bob, thank you for contacting us. We would recommend checking the door switches using a multimeter, if they are fine, you will need to replace the thermostat, part number PS2370190. Good luck with your repair!
our GE microwave went completely dead, no lights even as if not having power or connected, but the outlet it's plugged in does HAVE power, other appliances work with that outlet.
My son had ONLY the fan on when it made a slight pop sound and went dead.
Hello Ara, thank you for getting in touch. Based on our understanding of the issue, we would suggest checking the fuse, part number PS2370189, to solve the problem. We hope this helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Tray Glass Broken
32 of 44 peoplefound this instruction helpful.
Ramona from Woodbridge, VA
Really Easy
Less than 15 mins
I broke the tray glass in the microwave cleaning it so this was a no brainer. The best part of this was the PartSelect experience. I ordered the part on the 30th of December and received it on 3 Jan!!! I have used PartSelect before for fridge repair and had the same experience.
Was this helpful?
Thank you for voting!
Microwave made loud buzz noise and did not heat
42 of 81 peoplefound this instruction helpful.
Gregg from Santa Ana, CA
Really Easy
Less than 15 mins
Screw drivers
I followed the generic trouble shooting directions on the web site. It suggested either diode, capacitor and/or magnetron. I test each. All tested OK except diode. It was supposed to measure open in one direction and appox 200k ohms in the other direction. My diode measured open in both directions (tried multiple times, multiple sett
... Read moreings). I replaced the diode. The order process was great and it shipped immediately. I knew I was in trouble when I measured the new diode and it too was open in both directions. It was easy to install but unfortunately no joy - did not solve the problem. At this point it is likely cheaper just to buy a new one
Read less
Was this helpful?
Thank you for voting!
The microwave glass cooking tray broke.
22 of 27 peoplefound this instruction helpful.
Fran from Bedminster, NJ
Really Easy
Less than 15 mins
No actual repair was necessary. However I do want to thank PartSelect for sending a replacement so quickly.
My Orders
