This light bulb is a 40 watt, 130-volt clear appliance light bulb that is manufactured to fit microwaves with small-base light bulb sockets. The light bulb illuminates the inside of the microwave whil...
$22.00
In Stock
Order within the next 4 hrs and your part ships today!
This light bulb socket that is used in microwaves. The socket is meant to fit small-base light bulbs. * Please note: The light bulb is not included with this part and is sold separately. If the follow...
$23.29
In Stock
Order within the next 4 hrs and your part ships today!
The secondary door switch is a simple on/off mechanism that stops the microwave from operating when the door is open (normally opened). The switch monitors the door latch position, and communicates w...
$45.34
In Stock
Order within the next 4 hrs and your part ships today!
The microwave glass light lens protects the light bulb inside the appliance. It is clear in color and measures approximately 6-1/2 inches long, and 2-1/2 inches wide. You may notice that this part is ...
$17.46
In Stock
Order within the next 4 hrs and your part ships today!
Unplug your microwave before attempting this repair. You will need to remove the grill, which is held into place by two screws at the top of the grill (open your microwave door before doing this). Rem...
$37.02
In Stock
Order within the next 4 hrs and your part ships today!
This repair is simple if you know what needs to be done. In my particular case, only the top screw was exposed from the inside of the microwave door. In order to get to the bottom screw, I had to pry the thin, rectangular trim away from the door. A thin, hard pry blade works good for this. Once you get one corner free, the rest of it
... Read morepulls off pretty easily. I removed both screws, replaced the handle with the new one and secured the new one with the old screws. The new handle does NOT come with new screws, so you will need to buy new ones if you don't have the screws from the previous handle. Overall, it was a very simple fix worth doing yourself.
I ordered a microwave cooking tray from PartSelect; userfriendly site; and within two days, my part was delievered and easily installed. Thank you PartSelect!
I removed the screw from top. I pried of the edge with the casing with the flat end of a screwdriver. I removed the bottom screw. I then put the new handle in place and screwed it in place.