Quick Question!

Have you ever purchased from PartSelect.com before?

Models > JVM1340BW02

JVM1340BW02 General Electric Microwave - Overview

Get Parts and Repair Help for JVM1340BW02

If you know the microwave repair part you need, you can browse the list of all parts on the JVM1340BW02, or you can search by name or part description. You can also find your part by where it is located on the JVM1340BW02 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the JVM1340BW02

[Viewing 2 of 2]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$7.28

Light Bulb - 40W 130V

This light bulb is a 40 watt, 130-volt clear appliance light bulb that is manufactured to fit microwaves with small-base light bulb sockets. The light bulb illuminates the inside o...

$13.51

Light Socket - 250V 75W

This light bulb socket that is used in microwaves. The socket is meant to fit small-base light bulbs. * Please note: The light bulb is not included with this part and is sold separately. If the following symptoms occur, you may need to replace this part: existing socket is broken or cracked, light bulb is not turning on, or new light bulb does not work. Remember to unplug microwave before installing this part and refer to the manual provided by the manufacturer for installation instructions and a detailed diagram.

$22.12

Secondary Door Switch

The secondary door switch is a simple on/off mechanism that stops the microwave from operating when the door is open. The switch monitors the door latch position, and communicates ...

$10.61

Glass Light Lens

The microwave glass light lens protects the light bulb inside the appliance. It is clear in color and measures approximately 6-1/2 inches long, and 2-1/2 inches wide. You may notice that this part is cracked or broken and will need to be replaced. You will need to remove the screw holding the cover in place. Unhook the cover from the bottom panel. Bend the tabs up that are securing the old lens in place. The textured side should be facing up. Place the new lens into place and secure back into place.

$20.30

Monitor Door Switch

Unplug your microwave before attempting this repair. You will need to remove the grill, which is held into place by two screws at the top of the grill (open your microwave door bef...

$67.41

Cooking Tray

This glass tray rotates in your microwave ensuring more even temperatures.

$55.29

Aluminum Grease Filter

This aluminum filter collects grease particles in the air from cooking. Sold individually.

$23.19

Hood Damper Assembly

$2.75

Grille Screw

$71.06

High Voltage Diode

This diode has a 1/4" female connection and an eyelet.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Microwave Cooking Tray Missing

  • Customer: Chris from Elmhurst, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 522 of 587 people found this instruction helpful
I ordered a microwave cooking tray from PartSelect; userfriendly site; and within two days, my part was delievered and easily installed. Thank you PartSelect! read more

Microwave Door Handle Broken

  • Customer: Kristofer from Wayne, PA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 491 of 495 people found this instruction helpful
This repair is simple if you know what needs to be done. In my particular case, only the top screw was exposed from the inside of the microwave door. In order to get to the bottom screw, I had to pry the thin, rectangular trim away from the door. A thin, hard pry blade works good for this. Once you get one corner free, the rest of it pulls off pretty eas... read more

Broken Handle

  • Customer: Bernadette from Arlington, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 446 of 524 people found this instruction helpful
I removed the screw from top. I pried of the edge with the casing with the flat end of a screwdriver. I removed the bottom screw. I then put the new handle in place and screwed it in place. read more