This oven window pack assembly includes a heat-resistant glass pane and its surrounding frame, designed to restore visibility, safety, and energy efficiency to your appliance. Positioned in the oven door, the window allows users to monitor cooking progress without opening the door, helping maintain consistent internal temperatures. A prop...Read moreerly sealed window also supports insulation, reducing heat loss and promoting even cooking. Replacement is recommended if the glass is cracked, fogged, or the seal is compromised, as these issues can affect performance and safety. This assembly is engineered for compatibility with select gas and electric oven models and offers a reliable solution for restoring full functionality.
This halogen light bulb is a genuine OEM component designed for top-mounted lighting in wall ovens and ranges. Operating at 120 volts and 40 watts, it emits a clear, warm white light (approximately 2700K) to illuminate the oven cavity during cooking. The G9 base features two looped pins spaced 9mm apart, ensuring a secure fit in high-heat...Read more environments. Built to withstand elevated temperatures, this bulb enhances visibility inside the oven without compromising performance. Installation should be done with the power off, and the bulb should not be handled with bare hands to prevent damage. Always verify compatibility before purchasing.
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to connect the different parts of your oven door. This part is an authentic OEM part sourced directly from the manufacturer.
This is an oven rack that is compatible with your range. Oven racks are designed to hold and support food items while they are cooking or baking within your oven and can also be used to cool or dry items outside of it. If this oven rack is damaged and warp or bent, or if it is missing and you require a new one, it will need to be replaced...Read more. This rack measures 25-inches wide and 16-inches deep and is made of metal. To replace this oven rack, simply slide out the old one, and slide in the new one. This oven rack is an OEM part and is sold by itself.
This oven temperature sensor assembly is a precision component designed to monitor and regulate the internal temperature of select wall ovens, ranges, and microwave-oven combinations. It continuously communicates with the control board, sending real-time temperature data to ensure the oven maintains the set cooking temperature. A malfunct...Read moreioning sensor may result in inaccurate heating, temperature fluctuations, or premature cycling of heating elements. Replacing the sensor restores consistent performance and accurate cooking results. Installation typically involves disconnecting power, accessing the rear or interior of the oven cavity, and securing the sensor in place. Common symptoms of a faulty sensor include inconsistent temperatures, error codes, and extended cooking times.
Maintain safe and consistent oven performance with this genuine cooling fan sensor board. This electronic component monitors the cooling fan’s speed and communicates with the main control board to prevent overheating, ensuring accurate temperature regulation during baking and broiling. Ideal for resolving issues such as error codes, overh...Read moreeating, or inconsistent temperatures, this replacement part is engineered for reliability and precise operation. Installation involves disconnecting power, removing the old board, and securing the new one in place for proper functionality.
This genuine OEM cooling fan assembly is designed for select wall ovens, ranges, and microwave/oven combinations to maintain proper airflow and prevent overheating during cooking. By circulating air and venting excess heat, it protects internal components such as wiring and electronics, ensuring safe and efficient operation while extendin...Read moreg the appliance’s lifespan. If your oven is overheating, the fan isn’t running, or you’re seeing error codes like F97, replacing the cooling fan can restore reliable performance. Installation is simple—disconnect power, remove the old fan, and secure the new assembly in place.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Susan - For model number JT3000SF5SS
August 25, 2021
For self cleaning, manual says to remove probe b4 hand. Is that necessary?
Hello Susan, Thank you for the question. If the Manual states it needs to be removed before the Self Clean it it more then likely to avoid damaging the Sensor. We hope this helps!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Lois - For model number JT3000SF5SS
September 18, 2021
How do i replace the oven bulb
Hello Lois, Thank you for your inquiry. We have researched your model and to replace just the bulb, you can remove the glass cover with a flat head screwdriver, remove the old bulb and replace it with a new one, then snap the cover back in place. Hope this helps.
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Andrea - For model number JT3000SF5SS
December 1, 2019
I don’t have a manual or anything for this oven. There is no lower element and no obvious place to plug in lower element. How does it work without lower element?
Hello Andrea,
Thank you for your question. The lower element is hidden in this model under part PS11729137 for your model. There should be a metal plate at the bottom of the oven with two screws on either side, remove the screws and you will see the baking element. Hope this helps!
NEED TO EPLACE THE OVEN HEATING ELEMENT DO YOU HAVE THE ELEMENT
Hello Vaughn, thank you for reaching out. We have researched the model you have provided and have found that the part you are looking for is the bake element, part number PS11729137. If you require assistance to place an order, please contact customer service. We hope that helps!
I got an F97 error code. I have removed the oven and accessed the lower cooling fan. It does not spin as freely as I would think it should. Can someone help me with tracking down a replacement part?
Hello Ron, thank you for your inquiry. The error code F97 indicates a problem with the cooling fan. As you have already checked the cooling fan and found it malfunctioning, we would recommend replacing it to solve the problem. It is listed on our site with part number PS12702967. We hope this helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
oven door inside glass shattered
27 of 40 peoplefound this instruction helpful.
Dean from LENEXA, KS
Very Easy
15 - 30 mins
Nutdriver, Screw drivers
watched repair video on disassembling oven door and replacing glass. followed the video.
Was this helpful?
Thank you for voting!
Convection oven fan and door light not working
18 of 22 peoplefound this instruction helpful.
Michael from Albuquerque, NM
Really Easy
30 - 60 mins
Nutdriver
The first step was to determine whether the problem was with the fan itself or the switch. I did this by opening the back cover and using a Volt meter to verify that the fan was not getting power. (I could have skipped this step.)
Next, I unplugged the range, closed up the back cover and lifted the range hood by removing two he
... Read morex head screws that are just inside and on either side of the top of the opening in the range door. Propping the hood open, I removed the connector leading to the switch, then pushed the switch out the front. Inspection showed that the switch was damaged so I closed up the range and ordered the part from Part Select. Once the part arrived, it was a 15 minute job to unplug the range, lift the top, install the new switch, and close up the unit.
Caution. On starting to install the switch, I failed to unplug the range and my finger brushed one of the hot contacts leading to the switch. Thankfully, I was not injured. Do not repeat my mistake on this issue. Unplug the range even if you're only installing this simple switch.
Read less
Was this helpful?
Thank you for voting!
Oven door window
19 of 34 peoplefound this instruction helpful.
Lona from THIEF RVR FLS, MN
Very Difficult
30 - 60 mins
They part we received was not the right part. Called GE and ordered a new part with the same number and it worked perfectly!! Yr part was the wrong size so has to send back. Very frustrating!!!!
My Orders
