This large broiler pan is found in the bottom of your oven and is used to catch drippings from broiling foods. This part includes the grate and bottom pan and is made of porcelain. The grate measures 15-1/2 inches wide by 13 inches deep and the pan is about 17 inches wide by 13 inches deep. No tools are required to replace this item, simp...Read morely pull out the lower drawer of your range, pull down the front of the drawer, slide the pan out and slide the new one into place. This is a genuine part sourced right from the manufacturer.
This door gasket or seal is used in ranges and ovens. The rubber gasket creates a protective seal between the oven door and the opening of the oven. The function of this seal is to trap heat and prevent it from escaping when the oven door is closed. If your oven door gasket is ripped, damaged, or you find hot air is escaping from your ove...Read moren, it is best to replace the gasket to solve the problem. Remember to unplug your appliance from the power source before installing this part. For installation instructions, refer to the manual provided by the manufacturer.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The oven gasket was leaking
42 of 58 peoplefound this instruction helpful.
Joe from Broadview Heights, OH
Easy
Less than 15 mins
Old gasket had become brittle. Was able to find the 22 yr old model and part on PartSelect (could not track it down on GE's site. Inner panel was removed with four screws. Old gasket came out. Installed new gasket making sure the bead fit into the groove provided in the door panel. Re-assembled. All is well. Thanks
Was this helpful?
Thank you for voting!
I broke the glass door while installing built in oven
5 of 8 peoplefound this instruction helpful.
David from Morrison, IL
Easy
15 - 30 mins
Screw drivers
I was so relieved to find the replacement glass for the door on my built in microwave/oven. I was worried about shipping this tempered glass panel but it was recieved well packaged. As soon as I openned the packing, I removed 6 scews holding the trim around the oven door, slide in the new glass, reinstalled the scews and grabbed the glass
... Read more cleaner. I was finished. Part select is a tremendous resource.
Read less
Was this helpful?
Thank you for voting!
timer knobs missing
5 of 11 peoplefound this instruction helpful.
Doris from Redwood City, CA
Really Easy
Less than 15 mins
Just pushed the new timer knobs onto the stem. They fit and now I can set the oven timer without having to use a pair of pliers to grip the stem and turn it.
Two of the knobs fit perfectly.
The stem for the the clock was broken off and there was not enough of the stem left for the new knob to fit.