EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JK3000DF2BB General Electric Wall Oven - Overview

Diagrams for JK3000DF2BB

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Screw – Part Number: WH2X930
$16.05
In Stock
Screw
★★★★★
★★★★★
(1)
Part #WH2X930
This screw is sold individually.
Range Lamp Halogen Bulb G9 – Part Number: WB25T10102
$26.39
In Stock
Range Lamp Halogen Bulb G9
★★★★★
★★★★★
(7)
Part #WB25T10102
This halogen light bulb is a genuine OEM component designed for top-mounted lighting in wall ovens and ranges. Operating at 120 volts and 40 watts, it emits a clear, warm white light (approximately 2700K) to illuminate the oven cavity during cooking. The G9 base features two looped pins spaced 9mm apart, ensuring a secure fit in high-heat environments. Built to withstand elevated temperatures, this bulb enhances visibility inside the oven without compromising performance. Installation should be done with the power off, and the bulb should not be handled with bare hands to prevent damage. Always verify compatibility before purchasing.
Range Screw – Part Number: WB01T10008
$16.05
In Stock
Range Screw
★★★★★
★★★★★
(2)
Part #WB01T10008
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to connect the different parts of your oven door. This part is an authentic OEM part sourced directly from the manufacturer.
SENSOR Assembly – Part Number: WB21X10165
$35.23
In Stock
SENSOR Assembly
★★★★★
★★★★★
(5)
Part #WB21X10165
This oven temperature sensor assembly is a precision component designed to monitor and regulate the internal temperature of select wall ovens, ranges, and microwave-oven combinations. It continuously communicates with the control board, sending real-time temperature data to ensure the oven maintains the set cooking temperature. A malfunctioning sensor may result in inaccurate heating, temperature fluctuations, or premature cycling of heating elements. Replacing the sensor restores consistent performance and accurate cooking results. Installation typically involves disconnecting power, accessing the rear or interior of the oven cavity, and securing the sensor in place. Common symptoms of a faulty sensor include inconsistent temperatures, error codes, and extended cooking times.
Switch – Part Number: WB24T10147
$30.53
In Stock
Switch
★★★★★
★★★★★
(3)
Part #WB24T10147
This light switch is controlled by opening and closing the oven door
Fan Sensor Board – Part Number: WB27T11463
$67.87
In Stock
Fan Sensor Board
★★★★★
★★★★★
(5)
Part #WB27T11463
Maintain safe and consistent oven performance with this genuine cooling fan sensor board. This electronic component monitors the cooling fan’s speed and communicates with the main control board to prevent overheating, ensuring accurate temperature regulation during baking and broiling. Ideal for resolving issues such as error codes, overheating, or inconsistent temperatures, this replacement part is engineered for reliability and precise operation. Installation involves disconnecting power, removing the old board, and securing the new one in place for proper functionality.
OVEN RACK – Part Number: WB48X32180
$71.41
In Stock
OVEN RACK
★★★★★
★★★★★
(2)
Part #WB48X32180
This sturdy oven rack provides a reliable, elevated surface for baking and cooking, helping you maximize space inside your oven. Designed for a precise fit, it ensures stability and efficiency when preparing multiple dishes. Ideal for replacing worn or damaged racks, it restores safe and effective performance to your appliance. Installation is simple—just slide the rack into the designated supports inside the oven.
COOLING FAN – Part Number: WB26T10066
$109.95
In Stock
COOLING FAN
★★★★★
★★★★★
(1)
Part #WB26T10066
This range and oven cooling fan is designed to circulate air within the control compartment, preventing heat buildup and protecting sensitive electronics during and after cooking. By maintaining proper airflow, it helps prevent overheating, error codes, and shutdowns, ensuring consistent performance and extending the life of your appliance. Built for durability and a precise fit, this replacement part restores safe and efficient operation. Installation involves accessing the control area and securing the fan according to your range’s specifications.
Wall Oven Door Lock Assembly – Part Number: WB10X23814
$106.39
In Stock
Wall Oven Door Lock Assembly
★★★★★
★★★★★
(1)
Part #WB10X23814
The door lock assembly locks the oven door during the self-cleaning cycle.
BROIL ELEMENT – Part Number: WB44X48680
$61.12
In Stock
Light Lens – Part Number: WB34T10145
$41.70
In Stock
GASKET OVEN DOOR – Part Number: WB35X34867
$42.78
On Order
GASKET OVEN DOOR
★★★★★
★★★★★
(1)
Part #WB35X34867
Ensure your oven is functioning at its best with the GE Oven Door Gasket. This essential component is designed to provide a secure seal for the oven door, helping to maintain the correct temperature within the oven and ensuring optimal cooking results. If you're experiencing heat leakage or inconsistent cooking performance, the issue could be a worn or damaged gasket. The GE Oven Door Gasket provides a reliable, efficient solution that perfectly fits GE oven models. By investing in a genuine GE replacement part, you're ensuring longevity and top performance for your appliance. Be sure to have this replacement done by a qualified professional to avoid any potential issues.

Common Symptoms of the JK3000DF2BB

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Convection oven fan and door light not working
18 of 22 people found this instruction helpful.
  • Michael from Albuquerque, NM
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
The first step was to determine whether the problem was with the fan itself or the switch. I did this by opening the back cover and using a Volt meter to verify that the fan was not getting power. (I could have skipped this step.)

Next, I unplugged the range, closed up the back cover and lifted the range hood by removing two he x head screws that are just inside and on either side of the top of the opening in the range door. Propping the hood open, I removed the connector leading to the switch, then pushed the switch out the front. Inspection showed that the switch was damaged so I closed up the range and ordered the part from Part Select. Once the part arrived, it was a 15 minute job to unplug the range, lift the top, install the new switch, and close up the unit.

Caution. On starting to install the switch, I failed to unplug the range and my finger brushed one of the hot contacts leading to the switch. Thankfully, I was not injured. Do not repeat my mistake on this issue. Unplug the range even if you're only installing this simple switch.
Was this helpful?
Thank you for voting!
A burnt out bulb
11 of 19 people found this instruction helpful.
  • George from PALM COAST, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
After opening the Oven door, I removed the glass cover to view and locate the bulb, at the inside, top front of the Oven. Removed the burnt out bulb by pulling it in a forward motion towards the front of the Oven, slid the new bulb into place and the Oven is again functional.
Was this helpful?
Thank you for voting!
The oven would not hold an even temperature.
7 of 7 people found this instruction helpful.
  • Jack from Bremerton, WA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I used a Trox bit to remove one screw, replaced the oven sensor and reinstalled the screw. The whole project took less than 5 minutes.
Was this helpful?
Thank you for voting!