JK25*R2 General Electric Range - Overview

Diagrams for JK25*R2

See every part. Know exactly what you need.

Parts for the JK25*R2

$45.29

Bake Element

★★★★★

(28)

Part #WB44X5099

This closed hinged-style bake element has screw in terminals.

$47.31

Broil Element

★★★★★

(30)

Part #WB44X173

The broil element is located at the top of the oven and gives off heat in order to bake evenly. If you notice that the element is not heating up or is not cooking evenly it could be because it is broken or burnt out. The depth of the screw-on terminals is 2-3/4 inches and they are 1-1/4 inches apart. Does not include mounting bracket. All...Read more

Read less

Oven Sensor

Part #WB21X158

This sensor offers 16 ohms of resistance at room temperature, though the resistance increases as the temperature increases.

Thermostat

Part #WB21X5209

The length of this thermostat's capillary is 62 inches.

DISCONTINUED

Part #WB24K2

CONTROL BD

Part #WB24X162

DISCONTINUED

Part #WB24X190

DISCONTINUED

Part #WB22X53

DISCONTINUED

Part #WB24X108

DISCONTINUED

Part #WB24X131

DISCONTINUED

Part #WB21X180

Common Symptoms of the JK25*R2

How this model fails, and the parts that fix it.

Little to no heat when baking

Fixed by
these parts

Show All

Little to no heat when broiling

Fixed by
these parts

Show All

Element will not heat

Fixed by
these parts

Show All

Oven not heating evenly

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

The lower bake element burned out.

67 of 72 people found this instruction helpful.

Carlos from Southaven, MS
Really Easy
Less than 15 mins
Nutdriver

First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, reconnected the wires to the new element, reattached it to the oven and voila!

It worked. What was really cool, once I ordered the part, I received it in only two work days!

Goo ... Read more

Read less

Was this helpful?

Replaced lower element in GE Spectra range.

22 of 31 people found this instruction helpful.

Phillip from Greeneville, TN
Really Easy
Less than 15 mins
Nutdriver

Hardest part was getting the wrong element and having to send it back and reordering correct one....too many variables. Two screws inside the oven removed, pull out range and take off back and attach new element to plug ins!

Was this helpful?

oven temperature too low

17 of 19 people found this instruction helpful.

Ryan from Henderson, NV
Easy
Less than 15 mins
Nutdriver

After ordering the proper part with the help of the phone customer service tech, I moved the stove from the wall, unclipped the connector, removed the two screws holding the sensor in place, and removed it. Reversed the above to put it back, and the oven holds perfect temperature.

Was this helpful?