EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JHP62NG6WH General Electric Range - Overview

Diagrams for JHP62NG6WH

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake Element – Part Number: WB44K5012
$47.40
In Stock
Bake Element
★★★★★
★★★★★
(82)
Part #WB44K5012
At the floor of your electric oven is the bake element. This partially open-style element comes with push-on terminals. The bake element will likely provide most of the heat for baking. Therefore, if the oven is not heating properly, or if food is burnt on top and undercooked below, your bake element may be at fault. If you can see that the element has been separated or blistered, you should replace the part immediately. If there is no visible damage, turn the oven on and check to see if the element heats evenly. If the element is not heating evenly, or if it is not heating at all, use a multi-meter to test for electrical continuity to see if the element needs replacing.
Door Handle End Cap – Part Number: WB7X7183
No Longer Available
Door Handle End Cap
★★★★★
★★★★★
(43)
Part #WB7X7183
This oven door handle end cap is used on both the left and right hand sides. Sold individually.
Surface Element - 8 Inch - 2350W – Part Number: WB30M2
$58.42
In Stock
Surface Element - 8 Inch - 2350W
★★★★★
★★★★★
(19)
Part #WB30M2
The surface element, also known as the coil surface element, transfers heat to the area on top of range. The element is 8 inches in diameter. If your surface element does not heat, over heats, or heats inconsistently, replacing this part can be the solution to your issue. To determine whether the element is defective, use a multimeter to test it. Before installing the new element, make sure the drip bowl is properly aligned with the notch of the pan. Insert the new element into the reciprocal at a 40 degree angle. Refer to the instructions provided by the manufacturer for more guidance.
Range Infinite Heat Switch Kit – Part Number: WB21X36771
$53.20
In Stock
Range Infinite Heat Switch Kit
★★★★★
★★★★★
(16)
Part #WB21X36771
The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.
Surface Burner Terminal Block Kit – Part Number: WB17X210
$74.79
In Stock
Surface Burner Terminal Block Kit
★★★★★
★★★★★
(7)
Part #WB17X210
This is a surface burner terminal block kit, also known as range surface element receptacle, for an oven, range, or stove. The kit comes with the terminal block, mounting clip, and wires. This surface burner terminal block kit connects the wiring harness to the surface elements. It is important to shut off the power to the appliance before starting this repair. You will need to remove all four elements, trim rings, and drip bowls to access the terminal block on your stovetop. This is an OEM replacement part that is sourced from the genuine manufacturer.
Meat Probe Thermistor – Part Number: WB20T10024
$64.55
In Stock
Meat Probe Thermistor
★★★★★
★★★★★
(4)
Part #WB20T10024
This probe is used to check the internal temperature of the meat to ensure proper temperature is reached. Also known as a Meat Probe.
Door Handle – Part Number: WB15K5076
$59.18
In Stock
Door Handle
★★★★★
★★★★★
(4)
Part #WB15K5076
This replacement door handle is designed to fit select range models and provides a secure grip for opening and closing the oven door. Measuring approximately 22 inches by 1 inch, it is constructed from durable black plastic for long-lasting performance. If your current handle is broken or missing, this genuine OEM part offers a reliable solution. Depending on your model, installation may require removing the inner panel of the oven door. Always refer to your owner's manual and wear work gloves for safety during installation.
Broiler Pan - Large – Part Number: WB48X10056
$43.18
In Stock
Broiler Pan - Large
★★★★★
★★★★★
(10)
Part #WB48X10056
This large broiler pan is found in the bottom of your oven and is used to catch drippings from broiling foods. This part includes the grate and bottom pan and is made of porcelain. The grate measures 15-1/2 inches wide by 13 inches deep and the pan is about 17 inches wide by 13 inches deep. No tools are required to replace this item, simply pull out the lower drawer of your range, pull down the front of the drawer, slide the pan out and slide the new one into place. This is a genuine part sourced right from the manufacturer.
High Voltage Diode – Part Number: WB27X1160
$97.20
In Stock
High Voltage Diode
★★★★★
★★★★★
(2)
Part #WB27X1160
This diode has a 1/4" female connection and an eyelet.
Inner Door Glass – Part Number: WB56X1907
No Longer Available
Inner Door Glass
Part #WB56X1907
Magnetron – Part Number: WB27X10249
$263.32
Special Order
Magnetron
Part #WB27X10249
This part is used to generate microwave energy/heat.
SCREW – Part Number: WB1X1261
$15.00
Special Order
SCREW
Part #WB1X1261

Common Symptoms of the JHP62NG6WH

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake element cracked on its own
627 of 638 people found this instruction helpful.
  • Timothy from Cordova, TN
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Flipped the breaker. Removed shelf, Find the right size nut socket, unscrew the two screws, pull the element out a little bit, disconnect the wires (on pretty tight), pull out element, clean out any mess in the oven, compare element with new one to make sure its the same size and such, connect wires to new element, replace screws, fl ip breaker back, turn on for a few minutes to make sure it works. Piece of cake.
Was this helpful?
Thank you for voting!
Oven took 30 minutes to get to 380 degrees-no hotter
388 of 392 people found this instruction helpful.
  • Sandra from Hayward, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I searched this site and read about the repairs - which made me feel like my husband could do it with ease. Then he removed two screws inside the oven, removed the broken element (didn't know it was broken til removed) and replaced the new one - just like that! The real key was being able to read how it was for other people who ha d already done it. That's the only reason I'm submitting my storey. Thanks
Was this helpful?
Thank you for voting!
Bake element burned out
202 of 273 people found this instruction helpful.
  • Laura from N. Little Rock, AR
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I turned off the power to the oven at the breaker. Then I removed the two screws from the old element, pulled the old element out about 3 inches and disconnected the wires from the element and installed the new one.
Was this helpful?
Thank you for voting!