JGS760SP4SS General Electric Range - Overview

Diagrams for JGS760SP4SS

See every part. Know exactly what you need.

Parts for the JGS760SP4SS

$17.16

Burner Grate Foot

★★★★★

(15)

Part #WB02X24790

This burner grate foot, also known as a bumper, is an authentic OEM replacement part for your range. It is a small black rubber component that acts as a buffer between the metal grate and the surface of the cooktops to prevent scratches and damage to the cooktop. It also stabilizes the burner grate and prevents it from shifting or sliding...Read more

Read less

$39.42

Burner Cap - Black - Medium - 9500 BTU

★★★★★

(20)

Part #WB29K10023

This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part that will replace it. This is an OEM part sourced directly from the manufacturer and is sold individually.

$49.60

Burner Cap - 15K

★★★★★

(23)

Part #WB28K10222

This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in color and is sold individually. It is a little more than 4 inches in diameter. To replace the burner cap, simply remove the damaged cap, and r...Read more

Read less

$154.12

GRIDDLE

★★★★★

(27)

Part #WB31X49806

This is a non-stick griddle designed for use with most major appliance brand stovetops. This griddle measures approximately 20 inches long and 9 inches wide and sits on top of your stovetop to cook food. If your current griddle is damaged, no longer provides a non-stick surface, or is simply dirty and no longer useable, it needs to be rep...Read more

Read less

$79.26

Oven Rack

★★★★★

(16)

Part #WB48X20249

This metal oven rack provides a stable and durable surface for baking, roasting, and broiling inside your oven. Designed to fit select gas range and oven models, it promotes even heat circulation and airflow around food for consistent cooking results. Constructed from solid 304 stainless steel, the rack resists rust and warping even at hi...Read more

Read less

$39.95

Oven Light Housing

★★★★★

(12)

Part #WB08T10002

The light housing is also known as a lamp holder and is a part for the oven in your range. The function of this piece is to hold the bulb that will light up the inside of your oven. As per the manufacturer instructions, if your bulb has burnt out you must buy the bulb for this part locally. This light housing is roughly five inches high, ...Read more

Read less

$19.49

Range Surface Burner Cap, Small

★★★★★

(1)

Part #WB16X28654

Proper burner performance depends on a cap that matches the burner head and lies completely flat. Cracks, damaged mounting feet, or heavy buildup can cause poor ignition and an uneven flame. Inspect the burner head, ports, and igniter before ordering a replacement. Match the caps size, shape, and color to the full appliance model and burn...Read more

Read less

$17.28

Range Leg Leveler

★★★★★

(5)

Part #WB02K10182

$16.05

Screw

★★★★★

(1)

Part #WR01X10065

This replacement screw secures components at the fastening points specified in the appliance parts diagram. It has a listed 10-32 thread and is sold individually. Damaged threads, a worn head, or a missing screw may prevent the attached part from staying secure. Inspect the mating hole and surrounding mounting area as well before replacem...Read more

Read less

$55.22

BURNER

★★★★★

(8)

Part #WB16X24722

Irregular flames or poor ignition can result from damage or buildup in the surface burner base. The base supports the burner cap, routes gas to the flame ports, and helps keep the flame pattern balanced. First remove loose debris, make sure the cap sits flat, and check the igniter for cracks or misalignment. Match the replacement to the r...Read more

Read less

$16.05

Range Screw

★★★★★

(2)

Part #WB01T10008

This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to connect the different parts of your oven door. This part is an authentic OEM part sourced directly from the manufacturer.

$74.08

IGNITER GLOWBAR

★★★★★

(8)

Part #WB13X40206

This is an official gas igniter for various models of oven. This part is used to ignite the burner within models of gas GE ovens. If your oven is experiencing heating issues, this igniter has likely failed or will fail imminently, and will need to be replaced. Replacing this igniter will require a screwdriver, pliers, and a wrench. This igniter is sold as an individual OEM part and does not come with any other parts.

Questions And Answers for JGS760SP4SS

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Nancy - For model number JGS760SP4SS

January 9, 2025

Can I get a a grate for the center

Hi Nancy, Thank you for reaching out. The Center Grate is listed as PartSelect Number PS11771735. We hope this helps, good luck with the repair!

$105.97

Central Grate

1 person found this instruction helpful.

Was this helpful?

Ian - For model number JGS760SP4SS

June 7, 2026

Are there any online resources for replacing the control panel on my particular model? Our panel has a mind of its own and switches on and off and locks itself and switches modes while cooking constantly. We ordered the new panel and it looks pretty straight forward to just unplug the old one and plug in the new one, however getting the into the oven to access and take out the old panel has proven far more difficult than I expected. I’ve found a ton of GE oven videos, but none that seem to match up with the specs of my particular model, including where screws and things are located. Any information anyone has would be greatly appreciated! Thank you!

Hello Ian, thank you for getting in touch. To remove the control panel with display, remove the knobs first by pulling them straight out of the shafts. There were two screws on the side of the housing that hold the control panel. Remove these screws. Once you remove the screws you will be able to pull up the full panel. You can also remove the screws on the knobs switches as their wires are small and may hold the frame. Take a picture of the control panel wire harness before removing any wire. We hope this helps.

$133.86

RC19 CONTROL (FLASHED)

Was this helpful?

Janet - For model number JGS760SP4SS

December 19, 2023

How can I get a conversion kit to make this range usable with lp?

Hello Janet, Thank you for writing. The LP Conversion Kit for this model is listed as PartSelect #: PS16225947. Good luck with the repair!

$36.66

LP CONVERSION KIT

Was this helpful?

Common Symptoms of the JGS760SP4SS

How this model fails, and the parts that fix it.

Will Not Start

Fixed by
these parts

Show All

Little to no heat when baking

Fixed by
these parts

Show All

Element will not heat

Fixed by
these parts

Show All

Gas igniter glows, but will not light

Videos related to models starting with JGS760SP4SS

Watch our pros, then fix it yourself.

Replacing the GRIDDLE

Replacing the Oven Rack

Replacing the Oven Light Housing

Replacing the Range Leg Leveler

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Oven Lamp Holder Burned

25 of 33 people found this instruction helpful.

Jack from Okmulgee, OK
Really Easy
Less than 15 mins
Screw drivers

removed two phillips screws. Unplugged electrical connections replaced unit from PartSelect. They sent holder cover and new bulb (surprise). Great store with great directions.

Was this helpful?

Gas oven was not lighting (bake only)

9 of 9 people found this instruction helpful.

Jerry from MACOMB, MI
Really Easy
15 - 30 mins
Socket set

Repair was very easy. 2 screws to remove the bottom cover inside the oven. 2 more screws to remove the igniter. Cut the wires to remove it from the back of the oven. 3 screws to remove the back cover. Un-clipped old igniter , pushed new one through the hole (from inside the oven). Connected and re-applied screws. Worked like a charm.

Was this helpful?

Missing grate foot / bumper

9 of 13 people found this instruction helpful.

Irene H from HENRICO, VA
Very Easy
Less than 15 mins

Put in a new foot / bumper. That's it.

Was this helpful?