This kit is equipped with the oven control, faceplate and any necessary installation wires. This part may look different from the original, but should still function the same. The wiring is different, and is recommended to be installed by a repair person.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan - For model number JGRS14GET1BB
December 2, 2019
Oven will not work doesn't light up
Hello Dan and thanks for writing.
Sounds like you might have a faulty oven ignitor part # PS243425 or oven sensor part # PS236043, check both and replace if needed. We hope this helps. Please contact us anytime.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
oven door seal was old and falling apart
56 of 67 peoplefound this instruction helpful.
eric from washington, DC
Really Easy
Less than 15 mins
Screw drivers
at first thought the seal would just slide out and the same for the replacement. when I realized that this was not the case and began to wonder what....? I saw the screws at top and bottom, took them off and voila the inner shell moved forward enough to take out the old, slide in the new, push in, replace the screws and back to a happy w
... Read moreife with an oven that can bake correctly again
Read less
Was this helpful?
Thank you for voting!
The end caps broke on my oven door handle.
45 of 46 peoplefound this instruction helpful.
Harry from Thomasville, GA
Easy
15 - 30 mins
Screw drivers
1st I opened the oven door and removed the 2 screws that hold the outside and inside of the door together. With the door separated I removed the 2 screws that hold the end caps in place, then removed the old end caps. I put the new end caps on the oven door handle, aligned the holes for the end cap screws and reinstalled the screws,then
... Read morereinstalled the oven door screws,closed the oven door and started cooking.
Read less
Was this helpful?
Thank you for voting!
old enc caps cracked; one broken off the oven door
6 of 6 peoplefound this instruction helpful.
Randy from Olympia, WA
Easy
15 - 30 mins
Nutdriver, Screw drivers
Removed oven door from oven. Removed the inner oven door portion from the outer part to gain access to inner screws attaching end caps to front of stove door. Removed those screws and the old end caps & broken off pieces. Pressed oven door handle bar into new end caps. Reattached oven door handle assembly to front of oven door. Reinstalle
... Read mored inner oven door which included long screws that also went into the new end caps. Reinstalled oven door on oven. Job was easy. Price was certainly right for the end caps at $10.01/each.
My Orders
