EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JGP3036DL2WW General Electric Range - Overview

Diagrams for JGP3036DL2WW

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Grate Foot – Part Number: WB02T10461
$16.09
In Stock
Grate Foot
★★★★★
★★★★★
(21)
Part #WB02T10461
The Grate Foot is a black rubber part which attaches underneath the grate in order to protect your stovetop from being scratched, which it does by cushioning the grate on your gas range. If this part appears visibly broken or no longer holds in place, which can happen to these feet over time, then it should be replaced. Check your model number and user manual to see if this part is right for you. Because this part is sold individually, make sure to order the quantity that you require. We generally recommend checking all of the grate feet on your appliance and replacing them at the same time, since it is an inexpensive part and they tend to wear out at around the same rate. Spares are good to have in the event of future failures. Before beginning this repair, ensure that the surface is cool to the touch. Simply pull the worn or cracked foot out and install the new grate foot. This process should not require any tools or accessories.
Burner Cap - Black - Medium - 9500 BTU – Part Number: WB29K10023
$39.42
In Stock
Burner Cap - Black - Medium - 9500 BTU
★★★★★
★★★★★
(20)
Part #WB29K10023
This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part that will replace it. This is an OEM part sourced directly from the manufacturer and is sold individually.
Burner Cap - 15K – Part Number: WB28K10222
$49.60
In Stock
Burner Cap - 15K
★★★★★
★★★★★
(23)
Part #WB28K10222
This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in color and is sold individually. It is a little more than 4 inches in diameter. To replace the burner cap, simply remove the damaged cap, and replace it with the new one. No tools are required for this repair. This is an OEM part from the manufacturer.
Burner Cap – Part Number: WB29K10024
$38.26
In Stock
Burner Cap
★★★★★
★★★★★
(24)
Part #WB29K10024
This is a burner cap for your gas range. The cap acts as a cover for the burner head. If your old burner cap is damaged or missing, this is the part that will replace it. The cap is black in color and about 3 and a half inches in diameter. This is a quality OEM part sourced directly from the manufacturer. This cap is sold individually.
Range Surface Burner Cap, Small – Part Number: WB16X28654
$19.49
In Stock
Range Surface Burner Cap, Small
★★★★★
★★★★★
(1)
Part #WB16X28654
Proper burner performance depends on a cap that matches the burner head and lies completely flat. Cracks, damaged mounting feet, or heavy buildup can cause poor ignition and an uneven flame. Inspect the burner head, ports, and igniter before ordering a replacement. Match the caps size, shape, and color to the full appliance model and burner location. Allow every surface to cool before lifting the old cap, do not force the replacement into place, and confirm that the flame burns evenly after installation.
BURNER – Part Number: WB16X24722
$55.22
In Stock
BURNER
★★★★★
★★★★★
(8)
Part #WB16X24722
Irregular flames or poor ignition can result from damage or buildup in the surface burner base. The base supports the burner cap, routes gas to the flame ports, and helps keep the flame pattern balanced. First remove loose debris, make sure the cap sits flat, and check the igniter for cracks or misalignment. Match the replacement to the ranges full model number, burner size, and position. Shut off both gas and electrical power before removal. Reassemble without bending the igniter or changing any gas components, then verify that the flame is even and mostly blue.
Burner – Part Number: WB16X24724
$40.55
In Stock
Burner
★★★★★
★★★★★
(1)
Part #WB16X24724
This medium gas surface burner provides steady, even heat for everyday cooking tasks such as sautéing, simmering, and boiling. Made from durable, high-heat-resistant materials, it restores proper flame output when the original burner becomes worn, uneven, or fails to light. Designed to match the appliance’s original fit, it installs easily by removing the old burner and placing the new one in position, helping your cooktop perform reliably again.
Burner – Part Number: WB16X24721
$34.92
In Stock
Burner
Part #WB16X24721
Economic Nut – Part Number: WB01K10037
$16.09
In Stock
Economic Nut
Part #WB01K10037
This economic nut is a manufacturer-approved replacement part for your oven range. The nut can become worn down or stripped over time and need replacing. Make sure to disconnect power to the unit and wait until it cools before beginning this repair.
Burner – Part Number: WB16X24723
$54.08
In Stock
GRATE Assembly LGE – Part Number: WB31X29298
$96.35
In Stock
REGULATOR CONVERT PRESS – Part Number: WB19T10089
$54.53
In Stock

Common Symptoms of the JGP3036DL2WW

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Grate Foot had worn out
24 of 34 people found this instruction helpful.
  • Kathryn from Star City, AR
  • Really Easy
  • Less than 15 mins
A rubber grate foot on my range top had worn out. I pulled the worn foot out and installed the new grate foot with no tools or accessories. Good as new! Now I don't have to worry about the grate scraping my range top and scratching the paint. I also ordered extras so I won't have to wait if another wears out.
Was this helpful?
Thank you for voting!
Original burner cap was chipping; must have been dropped somewhere along the line.
8 of 15 people found this instruction helpful.
  • Mitzi from Briarcliff Manor, NY
  • Really Easy
  • Less than 15 mins
New burner cap replaced old; just placed over burner; no tools required.

One suggestion: burner cap should have been shipped with thicker bubble protection (easy to do). It was minimally wrapped and placed in a thin, bubble envelope, risking damage in shipping process. Luckily, the burner arrived in tact and usable.
Was this helpful?
Thank you for voting!
After my housecleaner had been here, I noted that 2 of the little rubber feet were missing from the top grates.
4 of 5 people found this instruction helpful.
  • Anne from Jacksonville, FL
  • Really Easy
  • Less than 15 mins
I was pretty upset as the grate wobbled, so I went on line and looked for GE Profile parts. To my amazement, I found the little rubber feet quite easily, and within 2 days they were here at my home. I simply had to stick them in the holes; however, I noted that they did not fit real tight, so I removed them and shot a little glue on the m, and they have been in place ever since. Thanks to you guys, I am a happy camper now!!!
Was this helpful?
Thank you for voting!