JGHP57GEJB General Electric Range - Overview

Diagrams for JGHP57GEJB

See every part. Know exactly what you need.

Parts for the JGHP57GEJB

Gas Surface Unit Control Knob

★★★★★

(4)

Part #WB3X712

Sold Individually. This knob accepts a D-shaped shaft.

Drip Pan

★★★★★

(1)

Part #WB32X90

Fluorescent Lamp/Bulb

★★★★★

(2)

Part #F26T8-CW-4

Clock Knob Kit - 3 Pack - Chrome

Part #WB3X459

Flat Style Oven Igniter with Wire Harness and Bracket

Part #WB2X10016

This igniter is lighted by the spark switch to produce a flame to ignite the oven.

Top Double Burner

Part #WB28X67

Selector Knob

Part #WB3X732

This selector knob may look different from the original, but will still fit and function the same. This knob takes a D-shaped shaft.

Ignition Switch

Part #WB24X379

This part creates the spark that lights the gas and starts the burners. When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.

Light Switch

★★★★★

(1)

Part #WB24X415

GRATE 4 PACK

Part #WB32X5087

SAFETY VALVE

Part #WB21X423

$91.06

SEAL-TOP/BTM

Part #WB2X9380

Common Symptoms of the JGHP57GEJB

How this model fails, and the parts that fix it.

Gas igniter glows, but will not light

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Gas stove knob was broken

14 of 14 people found this instruction helpful.

Winnie from New York, NY
Really Easy
Less than 15 mins

The stove is over 20 years old, it was bound to happen. Because PartSelect.com has pictures of the part from three different views & detailed measurements, I was more confident that this part would be what I would need. When the part arrived in just 2-3 days, I opened the package, and slipped it into the socket... DONE ....Easy!!

Was this helpful?

oven not up to temperature; shuts off before temp set

8 of 9 people found this instruction helpful.

Maurice from Overland Park, KS
Really Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers

Took amp reading, which was 2.5 amps, that identified that the igniter needed to be replaced, for the safety valve requires 3.2 amps or better. Replaced, and everything is okay.

Was this helpful?

Old knob cracked, duh, after 20+ yrs!

6 of 6 people found this instruction helpful.

Vicjki from Houston, TX
Really Easy
Less than 15 mins

Opened the package. Took out the knob. Put knob on spindle. The neat thing is it's an EXACT match! No bushings or adapters needed. No color difference; all the markings are identical. YAY!! I will be back, as all my appliances are aging sharply!

Was this helpful?