JGHC60GEN7 General Electric Range - Overview

Diagrams for JGHC60GEN7

See every part. Know exactly what you need.

Parts for the JGHC60GEN7

Flat Style Oven Igniter with Wire Harness and Bracket

Part #WB2X10016

This igniter is lighted by the spark switch to produce a flame to ignite the oven.

Light Switch

★★★★★

(1)

Part #WB24X415

IGNITER-MODULE BOARD

Part #WB21X5265

UNKNOWN

Part #WB62X1641

$154.63

HANDLE

Part #WB15X5184

UPPER & LOWER SWITCH

Part #WB24X5269

USE GEH WB2X9804

Part #WB02X9804

USE GEH WB3X628

Part #WB03X0628

USE GEH WB3X712

Part #WB03X0712

USE GEH WB3X5783

Part #WB03X5783

USE GEH WB3X5784

Part #WB03X5784

USE GEH WB15X233

Part #WB15X0233

Common Symptoms of the JGHC60GEN7

How this model fails, and the parts that fix it.

Gas igniter glows, but will not light

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

oven not up to temperature; shuts off before temp set

8 of 9 people found this instruction helpful.

Maurice from Overland Park, KS
Really Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers

Took amp reading, which was 2.5 amps, that identified that the igniter needed to be replaced, for the safety valve requires 3.2 amps or better. Replaced, and everything is okay.

Was this helpful?

Igniter

5 of 6 people found this instruction helpful.

GENE from HEBRON, OH
Difficult
30 - 60 mins
Screw drivers, Socket set

No problem getting to igniter in oven to remove from holder. Difficult to disconnect igniter at rear after removing drawer. Just hard to get to. Broke one of the plug-in receivers so had to crimp on a new one. This was a hinged pair that received the igniter lead and another lead that went to another part.

Was this helpful?

Oven Igniter DEAD

4 of 5 people found this instruction helpful.

Steve from Flanders, NJ
Really Easy
15 - 30 mins
Screw drivers

First wrote a wiring diagram then disconnected old igniter by removing two screws and unplugging.
Then just reversed the whole operation.
However, it never worked because the "oven/broiler" switch broke.
Its time for a new stove.
But I would recommend PartsSelect to anybody.
Your selection is great, you shipped as ... Read more

Read less

Was this helpful?