EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JGDS10GER1WH General Electric Range - Overview

Diagrams for JGDS10GER1WH

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Electronic Clock Kit – Part Number: WB50T10048
No Longer Available
Electronic Clock Kit
Part #WB50T10048
This part has been redesigned by the manufacturer. ***NOTE: The wiring could be different than the original and it will possibly need to be installed by an appliance repair person.
End Cap - Stainless - Right Side – Part Number: WB36K5193
No Longer Available
End Cap - Stainless - Left Side – Part Number: WB36K5194
No Longer Available
SPARK MODULE – Part Number: WB20K5029
No Longer Available
SPARK MODULE
Part #WB20K5029
OV Door SEAL-SIDE – Part Number: WB32K5029
$25.75
Special Order
OV Door SEAL-SIDE
Part #WB32K5029
BRACKET CAP PNL Mounting RT – Part Number: WB37K5018
$32.63
Special Order
BRACKET CAP PNL Mounting RT
Part #WB37K5018
CNT PANEL Mounting BRACKET-LT – Part Number: WB37K5019
$130.58
Special Order
USE GEH WB2X9967 – Part Number: WB02X9967
No Longer Available
USE GEH WB2X9967
Part #WB02X9967
USE GEH WB3K5092 – Part Number: WB03K5092
No Longer Available
USE GEH WB3K5092
Part #WB03K5092
USE GEH WB3K5130 – Part Number: WB03K5130
No Longer Available
USE GEH WB3K5130
Part #WB03K5130
USE GEH WB6K5015 – Part Number: WB06K5015
No Longer Available
USE GEH WB6K5015
Part #WB06K5015
USE GEH WB6X6 – Part Number: WB06X0006
No Longer Available
USE GEH WB6X6
Part #WB06X0006
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Old clock/time was dim and hard to see display
  • Douglas from Henderson, NV
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Replaced clock/timer from Part Select. Direct replacement and new unit works great.
Was this helpful?
Thank you for voting!
Light burned out,couldn't see the clock.
  • Richard from Great Falls, MT
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Started off with a philips screw driver,and a cold beer.Removed the cover for the clock/timer. Removed the clock with a plain screw driver.Reversed the order of removal including another cold beer.Just think,I could become a repairman,with enough cold beer.
Was this helpful?
Thank you for voting!
The bottons on the old clock were worn through
  • Jim from Philadelphia, PA
  • Easy
  • 15 - 30 mins
  • Screw drivers
I removed the face of the range back. I did not need to remove the three screws in the back like I thought - just the two torx in the front panel. 2) I lifted the clock face assembly out and up. 3) Look at the very simple wiring. Mine had white and red wire coming out of the "power block". 4) I looked at the old circuit board to see which is line and which was neutral. There was no designation. 5) i removed existing wires. 6) I unscrewed the old clock from its moorings, and saved screws. 7) I made sure the up/down orientation of the new clock was the same as the old one. There is an "up" word on the new circuit board, but with the clock upside down, make sure the buttons are correct. BTW, I had to affix the new clockl/timer cover plate onto the replacement clock, using that "up" word on the new circuit board to orient it. 8) I attached the Red wire to the Line connector on the new circuit board, and the White wire to the prong labelled neutral. 9) I used the old screws to secure the new clock to the range back. 19) There was an extension wire included with the new clock. I did not need to use it. 11) I wrestled the clock/timer back into the range itself, using the two torx I removed to secure it. 11) The new buttons on the left (Timer and Clock) are reversed, so now the Timer is the top butting and the bottom now sets the clock. 12) I do not like the feel and action of the new buttons. They are very stiff, and not particularly easy to push.
Was this helpful?
Thank you for voting!