Models
>
JES1453SS1SS
JES1453SS1SS General Electric Microwave - Overview
Sections of the JES1453SS1SS
[Viewing 1 of 1]Manuals & Care Guides for JES1453SS1SS
Click to downloadKeep searches simple, eg. "belt" or "pump".
Glass Cooking Tray
PartSelect #: PS956221
Manufacturer #: WB49X10139
This tray rotates in your microwave ensuring more even temperatures.
$67.94
In Stock
Roller Guide
PartSelect #: PS952372
Manufacturer #: WB06X10549
This roller guide sits underneath the glass turntable tray.
$28.99
In Stock
Questions And Answers for JES1453SS1SS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the JES1453SS1SS
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The drive shaft of the motor was broken and had to replace drive motor and roller guid
Cut the wire connection of access door on the bottom of the oven. Once access door was removed, I took the screw holding the drive motor in place, removed the wire connector and taped the connection to oven so that it did not drop into the bottom of the oven pulled motor out. Put new motor in, put connector back on motor secured the moto
... Read more
r with the scre, put access door back in place put roller guide on the drive motor from inside of the oven and put plate on roller and turned it on for a test. it worked.
Read less
Parts Used:
-
Rich from ROSELLE, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Glass dish would not rotate.
AFter I put the roller guide and glass cooking tray inside the microwave it still didn't spin. After check with the video, I was warned not to try to replace the motor which spins the tray, that there was a chance of electrical shock. I took the oven to my repair place and they made the repairs.
Parts Used:
-
Michael from Irwin, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheel was not turning rotisserie table
First I took out the screws holding the sides and back to the microwave. I discovered that the rotissereie motor was also damaged, but had an old GE microwave that had quit working-took out motor from other GE(motor was the same), installed motor in microwave, lined up pin to roller assy. and that was it!
Parts Used:
-
Marie from Pentwater, MI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!