JES1451DS1BB General Electric Microwave - Overview
Sections of the JES1451DS1BB
[Viewing 6 of 6]Keep searches simple, eg. "belt" or "pump".
Microwave Fuse
PartSelect #: PS1481237
Manufacturer #: WB27X10928
This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the micro...
$21.81
In Stock
Primary Door Interlock Switch
PartSelect #: PS237015
Manufacturer #: WB24X10047
This interlock switch is located in the door latch.
$54.07
In Stock
Cable Assembly
PartSelect #: PS16219547
Manufacturer #: WB27X35382
This part is the replacement high-voltage diode for your microwave. It is approximately 3 inches long and is sold individually. The high voltage diode is an electrical current control device inside yo...
$16.07
In Stock
Glass Cooking Tray
PartSelect #: PS956221
Manufacturer #: WB49X10139
This tray rotates in your microwave ensuring more even temperatures.
$67.82
Special Order
Light Bulb - 125V 20W
PartSelect #: PS247267
Manufacturer #: WB36X10063
This part is the replacement light bulb for your microwave. This bulb is 125 volts and 25 watts. It should come on automatically when you open your microwave door, or if the microwave is running. If y...
$21.45
In Stock
Monitor Interlock Switch
PartSelect #: PS11766871
Manufacturer #: WB24X25397
This switch monitor interlock is a critical safety component designed to ensure proper communication between the microwave door latch and the control board. When functioning correctly, it confirms tha...
$39.45
In Stock
Roller Guide
PartSelect #: PS952372
Manufacturer #: WB06X10549
This roller guide sits underneath the glass turntable tray.
$41.07
In Stock
Microwave Thermostat
PartSelect #: PS2321377
Manufacturer #: WB24X10163
Introducing the GE Microwave Thermostat, an indispensable safety device for your microwave appliance. This state-of-the-art thermal cut-off is designed to provide an additional layer of safety to your...
$22.52
In Stock
Synchronous Motor
PartSelect #: PS953598
Manufacturer #: WB26X10143
This motor rotates the glass turntable in the microwave.
$33.69
In Stock
Capacitor
PartSelect #: PS2353613
Manufacturer #: WB27X11033
This capacitor delivers the electrical boost required for motors to start and operate efficiently. Proper capacitance reduces strain on motor components and helps prevent startup failures or inconsist...
$58.05
In Stock
Manuals & Care Guides for JES1451DS1BB
Click to downloadQuestions And Answers for JES1451DS1BB
Ask our experts a question about this model and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas
February 17, 2020
What is the wattage on this oven? Thank you.
For model number JES1451DS1BB
Hello and thank you for writing.
This unit is 1.4 cu. ft. capacity 1100 Watts. We hope this helps. Please contact us anytime if you require further assistance.
6 people found this helpful.
Did this question help you?
Thank you for voting!
Tom
June 19, 2023
Where is the fuse located?
For model number JES1451DS1BB
Hello Tom, thank you for your inquiry. The fuse is located on the top right of the microwave, near the front, and on the noise filter board. Accessing it will require the top and side panels to be removed if the noise filter board cannot be viewed from the front. The microwave can hold a charge even when not plugged in and will need to be discharged before the repair. We hope this information helps!
Did this question help you?
Thank you for voting!
Austra
November 1, 2024
I am hearing a crackling sound when I use the microwave. What could be causing this sound? And is it reparable?
Thank you.
For model number JES1451DS1BB
Hello Austra, thank you for our question. A crackling sound may indicate arching or sparking inside of the cabinet. Arcing can be caused by a faulty Wave Guide PS2321139 or the exposed metal. Good luck with your repair.
Did this question help you?
Thank you for voting!
Related Parts:
James
July 12, 2025
How to replace plate turn table belts, or possibly moter
For model number JES1451DS1BB
Hello James, thank you for getting in touch. To remove the turntable belt, remove the turntable. The turntable is located at the bottom of the microwave below the turn table. The belt is attached to the motor shaft and the turntable support. Pull it off gently of the support and the motor shaft. To remove the motor, you will need to remove the bottom panel. The motor is at the bottom of the microwave, attached to the turntable support. Remove the screws that hold the motor in place and gently pull it out. We hope this helps.
Did this question help you?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the JES1451DS1BB
[Viewing 7 of 7]No heat
Fixed by
these parts
these parts
Show All
Won’t turn on
Fixed by
these parts
these parts
Show All
Tray won’t turn
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Doesn’t shut off
Fixed by
these parts
these parts
Show All
Door not closing properly
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Microwave completely stopped working
Turned out the issue was easily solved by replacing a single, inexpensive fuse.
First off, UNPLUG THE MICROWAVE.
The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the mic ... Read more rowave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
First off, UNPLUG THE MICROWAVE.
The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the mic ... Read more rowave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Read less
Parts Used:
-
Kim from Cliffside Park, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
966 of 1260 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I diagnosed the problem incorrectly: based on a previous repair.
-
Ralph from Brandon, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
66 of 139 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave runs with the door open
Remove microwave outer cover. Turn on side & locate the upper & lower door switches. Better to replace in pairs even if one is ok. Remove the wire harness to each switch. Then replace switch and re connect the wire harness. Re attach outer cover
and test to see if that solved the problem. If so then well done!!
and test to see if that solved the problem. If so then well done!!
Parts Used:
-
Thomas from Andover, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
37 of 58 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!