JES1290BJ02 General Electric Microwave - Overview
Sections of the JES1290BJ02
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
BUTTON LOCKING
PartSelect #: PS12582530
Manufacturer #: WB03X27704
Locking button for wave guide cover.
No Longer Available
Wave Guide Cover
PartSelect #: PS952413
Manufacturer #: WB06X10591
This part is the replacement wave guide cover for your microwave. It is gray in color and is approximately 3 ½ inches long and 5 inches wide. It has two small tabs at the top that allow it to lock int...
No Longer Available
Glass Cooking Tray
PartSelect #: PS1020971
Manufacturer #: WB49X10174
This tray rotates in your microwave ensuring more even temperatures.
$78.77
Special Order
Manuals & Care Guides for JES1290BJ02
Click to downloadQuestions And Answers for JES1290BJ02
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Common Symptoms of the JES1290BJ02
[Viewing 2 of 2]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Microwave Was Popping And Shooting Fire Sparks
I removed the plastic plug that held the wavecover in place and pulled the wavecover off. I replaced with new cover and it worked perfect.
Parts Used:
-
JULIE from MACON, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Trip breaker when opening door
Door microswith was stuck on. This is caused, I discovered, by frequently stopping the oven, while running, by opening the door rather than using the stop button. Causes the switch to arc and eventually fail. This causes the safety microswitch to trip the breaker when door is opened. There are little nubs sticking up on the spade connecto
... Read more
rs. You must squeeze them down before you can remove them from the switch. The main door switch is the upper one, mounted at an angle. You have to remove the latch assembly to remove the switch. The problem was obvious once I got the switch out. This problem could also blow the fuse, but in my case the breaker tripped first. Use an ohmmeter to check switch and fuse. The door switch is normally open. The safety switch is normally CLOSED. Instructions inside were helpful and described this problem. So, avoid this repair by always stopping oven with stop button!
Read less
Parts Used:
-
William from KETTLE FALLS, WA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
8 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
GE Wave Guide Cover was fried, needed replacement
The wave guide cover (wgc) are notoriously bad on this model. As far as I can tell even a little food that gets stuck on it combined with cooking small/insubstantial items will cause the wgc to overheat and catch on fire. Ordered a part from partselect, found it very easily on their site using a nice diagram and ordered it. The item cam
... Read more
e in two days and was a cinch to pop in and replace.
Read less
Parts Used:
-
Steven from Benicia, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!