Models > JEM3072DH1WW

JEM3072DH1WW General Electric Microwave - Overview

Sections of the JEM3072DH1WW

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
SCREW ST4 12PWBHC – Part Number: WB01X10431
SCREW ST4 12PWBHC
★★★★★
★★★★★
(1)
PartSelect #: PS8753375
Manufacturer #: WB01X10431
$11.40
  In Stock
MICRO SWITCH(STAND ON) – Part Number: WB24X10146
MICRO SWITCH(STAND ON)
PartSelect #: PS1019163
Manufacturer #: WB24X10146
$36.12
  In Stock
COVER, MICA – Part Number: WB06X10906
COVER, MICA
★★★★★
★★★★★
(1)
PartSelect #: PS8688067
Manufacturer #: WB06X10906
  No Longer Available
TRAY – Part Number: WB49X10229
TRAY
PartSelect #: PS3499649
Manufacturer #: WB49X10229
$65.98
  In Stock
COUPLER – Part Number: WB06X10861
COUPLER
★★★★★
★★★★★
(2)
PartSelect #: PS3491467
Manufacturer #: WB06X10861
$19.19
  Special Order
TRAY MOTOR – Part Number: WB26X10252
TRAY MOTOR
★★★★★
★★★★★
(2)
PartSelect #: PS3486610
Manufacturer #: WB26X10252
$51.55
  In Stock
ROTATING RING Assembly – Part Number: WB49X10231
ROTATING RING Assembly
★★★★★
★★★★★
(1)
PartSelect #: PS8755349
Manufacturer #: WB49X10231
$26.83
  In Stock
MICROSWITCH MONITOR – Part Number: WB24X10190
MICROSWITCH MONITOR
PartSelect #: PS3486598
Manufacturer #: WB24X10190
$51.61
  In Stock
FOOT – Part Number: WB06X10868
FOOT
PartSelect #: PS3491472
Manufacturer #: WB06X10868
$8.98
  Special Order
THERMOSTAT 110/0 *H – Part Number: WB20X10056
THERMOSTAT 110/0 *H
PartSelect #: PS3510693
Manufacturer #: WB20X10056
THERMOSTAT 110/0 *H
$48.46
  On Order
FILTER NOISE – Part Number: WB27X11140
FILTER NOISE
PartSelect #: PS3486696
Manufacturer #: WB27X11140
$102.09
  In Stock
Door button – Part Number: WB03X23855
Door button
PartSelect #: PS12226804
Manufacturer #: WB03X23855
  No Longer Available

Questions And Answers for JEM3072DH1WW

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
WHEN. YOU OPEN THE DOOR THE TURN TABLE WAS CONSTANTLY RUNNING
REPLACE SWITCH -STAND ON (NOT THE SWITCH-MONITOR) THERE ARE TWO OF THESE SWITCHES THE TOP ONE WAS DEFECTIVE.
THE ON OFF SWITCH BUTTON ON THE SWITCH WAS BROKEN
Parts Used:
MICROSWITCH MONITOR
  • Moin from SCOTTSDALE, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the cover for the tray motor was attached to the bottom cover at 6 points. they were 3mm to 4mm long.
I used small wire cutter I use in fly tying hobby. The metal was easy to cut. When cover was removed I unplugged the motor,removed it and plugged the new one in.
To replace the cover -- reverse it,place the 2 tabs on one edge into the slots that are already part of the base. On the opposite edge there is a domed shaped tab with a hole in center. Place the small screw that was provided back in and thighten.
Your Done
Parts Used:
TRAY MOTOR
  • James A from SILVERDALE, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!