JE63T002 General Electric Microwave - Overview

Sections of the JE63T002

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Ceramic Fuse - 15 Amp – Part Number: WB27X7
Ceramic Fuse - 15 Amp
PartSelect #: PS240270
Manufacturer #: WB27X7
$11.35
  On Order
High Voltage Diode – Part Number: WB27X1160
High Voltage Diode
★★★★★
★★★★★
(2)
PartSelect #: PS239843
Manufacturer #: WB27X1160
This diode has a 1/4" female connection and an eyelet.
$123.62
  In Stock
SMARTBOARD – Part Number: WB27X532
SMARTBOARD
PartSelect #: PS240032
Manufacturer #: WB27X532
$273.73
  Special Order
LATCH BODY – Part Number: WB2X9783
LATCH BODY
PartSelect #: PS243738
Manufacturer #: WB2X9783
$39.01
  Special Order
DISCONTINUED – Part Number: WB2X9791
DISCONTINUED
PartSelect #: PS243740
Manufacturer #: WB2X9791
  No Longer Available
CANOE CLIP – Part Number: WB2X9986
CANOE CLIP
PartSelect #: PS243814
Manufacturer #: WB2X9986
$19.68
  Special Order
DISCONTINUED – Part Number: WB27X730
DISCONTINUED
PartSelect #: PS240293
Manufacturer #: WB27X730
  No Longer Available
DISCONTINUED – Part Number: WB2X9785
DISCONTINUED
PartSelect #: PS654841
Manufacturer #: WB2X9785
  No Longer Available
DISCONTINUED – Part Number: WB2X9793
DISCONTINUED
PartSelect #: PS682395
Manufacturer #: WB2X9793
  No Longer Available
DISCONTINUED – Part Number: WB1X1364
DISCONTINUED
PartSelect #: PS687747
Manufacturer #: WB1X1364
  No Longer Available
DISCONTINUED – Part Number: WB2X9799
DISCONTINUED
PartSelect #: PS688118
Manufacturer #: WB2X9799
  No Longer Available
DISCONTINUED – Part Number: WB1X1359
DISCONTINUED
PartSelect #: PS688202
Manufacturer #: WB1X1359
  No Longer Available

Questions And Answers for JE63T002

Be the first to ask our experts a question about this model!

Common Symptoms of the JE63T002

[Viewing 2 of 2]
Won’t turn on
Fixed by
these parts
Fixing
Show All
No heat
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Noise and no Heat on Microwave oven.
First, I waste $65 by calling some "REPAIR" service. They showed at home and charge me that just to tell me
Second, I researched on the web and ordered a part, which was not the issue. I waste abnother $72
Third, I found Part-Select and got the right answer: the Diode was the problem. Ordered the part form Part-Select and it FIxed it !!!

Note: I did not buy a new microwave because this one is mounted on the wall and it will cost me +$800 just the lowest price.
Parts Used:
High Voltage Diode
  • Luis from Plano, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench set
33 of 49 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
PS240270 Ceramic Fuse - 15 Amp
PS240270
Ceramic Fuse - 15 Amp
Easy installation , remove microwave cover housing ,locate fuse by door catch & replace..
Received quickly..
Replaced fuse , removed microwave cover housing , located fuse adjacent door catch removed & installed new fuse...
Parts Used:
Ceramic Fuse - 15 Amp
  • Rob from NEWTON, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
11 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
CERAMIC FUSE BLEW WHILE HEATING VEGETABLES
I found an exploded view diagram of of my microwave model which was very helpful. You need only remove outside metal skin by removing 4 screws on either side and 4 more on the back. Remove 4 plastic hole plugs from the top mounting inserts. Gently pull sides out and lift up and back to remove outer skin. The fuse is located on the back right corner behind the control panel. You access from the side. The fuse is under the spreader bar. Lift fuse up gently to remove.

P.S. It was the MSP Capaciter and or the interlock switch, snap apart 21A (19) failure that actually caused the ceramic fuse to blow.
Parts Used:
Ceramic Fuse - 15 Amp
  • Richard from SAN JOSE, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!