Models > JE1160WD03

JE1160WD03 General Electric Microwave - Overview

Sections of the JE1160WD03

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Cooking Tray – Part Number: WB39X82
Cooking Tray
★★★★★
★★★★★
(2)
PartSelect #: PS248296
Manufacturer #: WB39X82
This tray rotates in your microwave ensuring more even temperatures.
$63.03
  In Stock
Light Bulb and Socket – Part Number: WB36X951
Light Bulb and Socket
★★★★★
★★★★★
(9)
PartSelect #: PS247776
Manufacturer #: WB36X951
This light bulb is sold with the socket. The bulb is 120V and 25W.
$18.47
  In Stock
SWITCH MON. – Part Number: WB24X824
SWITCH MON.
★★★★★
★★★★★
(2)
PartSelect #: PS237416
Manufacturer #: WB24X824
$16.29
  In Stock
Thermostat Cavity – Part Number: WB27X10568
Thermostat Cavity
★★★★★
★★★★★
(1)
PartSelect #: PS239710
Manufacturer #: WB27X10568
$21.01
  In Stock
Micro Switch – Part Number: WB24X10103
Micro Switch
PartSelect #: PS651389
Manufacturer #: WB24X10103
$16.51
  In Stock
Magnetron – Part Number: WB27X10682
Magnetron
★★★★★
★★★★★
(3)
PartSelect #: PS953838
Manufacturer #: WB27X10682
This part is used to generate microwave energy/heat.
$180.58
  In Stock
Turntable Motor – Part Number: WB26X186
Turntable Motor
★★★★★
★★★★★
(1)
PartSelect #: PS237917
Manufacturer #: WB26X186
$46.70
  In Stock
Turntable Guide with Rollers – Part Number: WB02X10806
Turntable Guide with Rollers
★★★★★
★★★★★
(1)
PartSelect #: PS224055
Manufacturer #: WB02X10806
This microwave turntable guide is located under the glass turntable. It is made of plastic, and comes with rollers.
$36.41
  On Order
THERMOSTAT MAGNETRON – Part Number: WB27X10567
THERMOSTAT MAGNETRON
★★★★★
★★★★★
(2)
PartSelect #: PS239709
Manufacturer #: WB27X10567
$17.02
  In Stock
Primary/Secondary Switch – Part Number: WB24X823
Primary/Secondary Switch
PartSelect #: PS237415
Manufacturer #: WB24X823
This is sold individually. Your appliance would need 2 of these.
$97.17
  In Stock
COUPLER – Part Number: WB02X10803
COUPLER
PartSelect #: PS224052
Manufacturer #: WB02X10803
$28.90
  In Stock
COVER WAVE GUIDE – Part Number: WB49X10078
COVER WAVE GUIDE
PartSelect #: PS250018
Manufacturer #: WB49X10078
$6.68
  On Order

Questions And Answers for JE1160WD03

Be the first to ask our experts a question about this model!

Common Symptoms of the JE1160WD03

[Viewing 3 of 3]
Won’t turn on
Fixed by
these parts
Show All
No heat
Fixed by
these parts
Show All
Tray won’t turn
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Original lamp burned out.
After looking up on the computer a schematic of the unit, all that was needed was removing four screws to remove the top and side cover which was one piece.
Next was removal of electrical connection to burned out lamp, then removing burned out lamp and installing the new lamp and reconnecting electrical connection.
Job was complete after reinstalling the cover.

Microwave now working with new lamp lighting when in use.
Parts Used:
Light Bulb and Socket
  • Rudy from Huntington, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
72 of 87 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave oven was completely dead.
Continuity checks showed the flame sensor was open. Schematic notes it opens at 217 degrees and closes at 30 degrees. Removed sensor and placed in freezer for twenty minutes. Tested sensor and it was now closed, reinstalled and microwave worked normally. Ordered new sensor in case the original is operating at too low a temperature.
Parts Used:
Thermostat Cavity
  • CHARLES from LAKE ARIEL, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
29 of 39 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The display was off and no buttons were working
I took the cover off and followed the electric current to see if it got as far as the display.
I did not get past the thermostat shut off where the current stoped. I jumped the thermostat and the unit worked. The part was so inexpensive that I decided to replace it rather than try and freeze the old one in hopes of "reseting" it.
Parts Used:
Thermostat Cavity
  • Michael from Astoria, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
17 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!