EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JD750DF2BB General Electric Range - Overview

Diagrams for JD750DF2BB

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven Sensor – Part Number: WB23T10015
$40.51
In Stock
Oven Sensor
★★★★★
★★★★★
(20)
Part #WB23T10015
The function of the oven sensor is to detect the temperature within the oven cavity. If you notice that the oven is too hot or too cold, or it is not heating evenly, you may need to replace the oven sensor. The oven sensor is typically located in the back of the oven so you will most likely need to pull your oven out to access it. Many of our customers have rated this repair as easy. You will need a Phillips screwdriver to complete this repair. Be sure to disconnect the power source and shut off the gas valve before doing this repair.
Radiant Element - 8 Inch – Part Number: WB30T10132
$68.15
In Stock
Radiant Element - 8 Inch
★★★★★
★★★★★
(33)
Part #WB30T10132
This 8-inch radiant stovetop element is a genuine replacement part designed to deliver consistent heat to cookware during stovetop use. It fits select electric ranges and cooktops and is engineered to restore proper heating performance when an existing burner is damaged, unevenly heating, or non-functional. The element transfers heat efficiently to support even cooking across a variety of pot and pan sizes. Installation involves lifting the cooktop and removing the screw and clip securing the old burner. A screwdriver is required, and the appliance should be disconnected from power before beginning the repair to ensure safety.
Screw – Part Number: WH2X930
$16.05
In Stock
Screw
★★★★★
★★★★★
(1)
Part #WH2X930
This screw is sold individually.
Halogen Bulb Kit – Part Number: WB49X29679
$61.40
In Stock
Halogen Bulb Kit
★★★★★
★★★★★
(8)
Part #WB49X29679
This light bulb is used in the interior oven. NOTE: This bulb has looped pins, not the straight pins.
Window Pack Assembly – Part Number: WB56X22160
$311.77
In Stock
Window Pack Assembly
★★★★★
★★★★★
(24)
Part #WB56X22160
This window pack assembly, also known as inner door glass, is supplied directly by the manufacturer for use in range ovens. It has measurements of approximately 22 inches by 14 inches. The inner door glass is situated between the outer door panel and the oven cavity. It acts as a barrier between the heat generated by the oven and the external environment. This provides insulation and protection while allowing users to easily view the oven cavity. It is made of tempered glass and is resistant to high temperatures and thermal shock. If the inner door glass becomes damaged or cracked, heat will escape from the oven, you may be unable to see the contents of the oven and the risk of injury will be increased.
Door Pad – Part Number: WB01T10026
$16.05
In Stock
Door Pad
Part #WB01T10026
This is the door pad only. The trim is sold separately.
ELEMENT HALIANT 12 TRIPLE – Part Number: WB30T10155
$203.46
In Stock
ELEMENT HALIANT 12 TRIPLE
★★★★★
★★★★★
(21)
Part #WB30T10155
This surface element is for ranges. Surface elements supply the heat to a cooking area on top of the range. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
Range Screw – Part Number: WB01T10008
$16.05
In Stock
Range Screw
★★★★★
★★★★★
(2)
Part #WB01T10008
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to connect the different parts of your oven door. This part is an authentic OEM part sourced directly from the manufacturer.
Snap-In Lens – Part Number: WB25T10022
$16.05
In Stock
Element Radiant 5.5 IN – Part Number: WB30T10145
$110.22
In Stock
Element Radiant 5.5 IN
★★★★★
★★★★★
(6)
Part #WB30T10145
This surface element is designed to deliver heat to a specific cooking zone on the top of an electric range, providing consistent and efficient performance for everyday meal preparation. Located beneath the cooktop surface, it plays a key role in maintaining accurate temperature control. Before installation, be sure to unplug the range or switch off the appropriate circuit breaker to ensure safety. Wearing protective work gloves is also recommended to prevent injury while handling electrical components.
Range Composite – Part Number: WB02T10453
$15.00
In Stock
Range Spacer Reinforcement – Part Number: WB02T10452
$22.91
In Stock
Range Spacer Reinforcement
Part #WB02T10452

Common Symptoms of the JD750DF2BB

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven was not coming up to temperature
57 of 79 people found this instruction helpful.
  • Sean from Highlands Ranch, CO
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
I had to remove the oven from the wall because the sensor plug connction is behind the unit. Two screws hold the sensor inside the oven and then I disconnected the lead and pulled the sensor out from the front. I installed the new sensor, tightened the two screws holding it in and connected the lead. Then reinstalled the oven into the wal l. Overall, a very easy repair once you get the oven out.
Was this helpful?
Thank you for voting!
Actual temperature did not match set temp
22 of 31 people found this instruction helpful.
  • Brian from Fairfield, CA
  • Easy
  • 15 - 30 mins
  • Screw drivers
Removed the oven door for easy acces to oven. Unscrewed (philips screwdriver) the screw holding temp sensor in place. Gently pulled the wiring until quick connector was located. Pushed down on locking level on quick connect while holding other end of wiring (so wiring would not fall back behind oven). Connected the new sensor and scre wed back in place. Reinstalled oven door. Tested temperature settings by turning on oven and comparing with a separate oven thermometer.
Was this helpful?
Thank you for voting!
Something in oven exploded and stained glass so couldn’t see what’s baking
17 of 20 people found this instruction helpful.
  • Charlotte from ORLANDO, FL
  • Really Easy
  • 30 - 60 mins
Ordered window pack from PartSelect then removed oven door from front of stove, then removed back of door and silver backing and glass pack. Dropped new glass into place. Replaced all backing,put door back onto stove. Tip. When removing screw keep them separated from each other as not to get mixed up when putting everything together. Goo d Luck, PartSelect has all the parts you need, this my second getting a part from them.
Was this helpful?
Thank you for voting!