Models > JCAS730L1WW

JCAS730L1WW General Electric Range - Overview

Sections of the JCAS730L1WW

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Drip Bowl - 8 Inch – Part Number: WB32X106
Drip Bowl - 8 Inch
★★★★★
★★★★★
(15)
PartSelect #: PS244696
Manufacturer #: WB32X106
Drip bowls are located under the heating elements and catch grease and spills that come from cooking on your stove top. If your drip bowl is damaged or rusted, it could allow grease to drip inside you...
$22.07
  In Stock
Single Heating Element Support Clip – Part Number: WB2X9719
Single Heating Element Support Clip
★★★★★
★★★★★
(7)
PartSelect #: PS243701
Manufacturer #: WB2X9719
The metallic clip, or also known as a broil element support, is for a oven element on a range. This part holds the broil element in place on top of the oven. If your support clip is broken then this r...
$16.68
  In Stock
Range Surface Element Control Switch - 6 Inch - 1560 W – Part Number: WB24T10029
Range Surface Element Control Switch - 6 Inch - 1560 W
★★★★★
★★★★★
(18)
PartSelect #: PS236754
Manufacturer #: WB24T10029
This switch controls the small burner on a range/stove top.
$45.15
  In Stock
Door Handle End Cap – Part Number: WB7X7189
Door Handle End Cap
★★★★★
★★★★★
(6)
PartSelect #: PS256619
Manufacturer #: WB7X7189
This end cap can be used for either the left or right side.
$22.26
  In Stock
Lens – Part Number: WB25T10041
Lens
★★★★★
★★★★★
(4)
PartSelect #: PS1020380
Manufacturer #: WB25T10041
This part is a replacement lens for your oven or range. The lens is red in color, and when the elements are turned on, the light behind the lens will turn on to inform the user that the element is, in...
$12.51
  In Stock
Terminal Block Kit – Part Number: WB17T10011
Terminal Block Kit
★★★★★
★★★★★
(13)
PartSelect #: PS953027
Manufacturer #: WB17T10011
This part provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
$56.72
  In Stock
Oven Electronic Control Board – Part Number: WB27T10469
Oven Electronic Control Board
★★★★★
★★★★★
(1)
PartSelect #: PS783551
Manufacturer #: WB27T10469
Overlay must be ordered separately.
$141.38
  In Stock
Indicator Light – Part Number: WB25K10002
Indicator Light
PartSelect #: PS237433
Manufacturer #: WB25K10002
$18.25
  In Stock
HANDLE – Part Number: WB15K10066
HANDLE
PartSelect #: PS1154881
Manufacturer #: WB15K10066
$113.68
  In Stock
Door Gasket - Gray – Part Number: WB04K10020
Door Gasket - Gray
PartSelect #: PS1154865
Manufacturer #: WB04K10020
$94.53
  In Stock
UNIT Assembly 6 – Part Number: WB30K10015
UNIT Assembly 6
PartSelect #: PS1018906
Manufacturer #: WB30K10015
$139.85
  In Stock
Bake Element – Part Number: WB44K10019
Bake Element
PartSelect #: PS1021507
Manufacturer #: WB44K10019
$191.49
  In Stock

Questions And Answers for JCAS730L1WW

Be the first to ask our experts a question about this model!

Common Symptoms of the JCAS730L1WW

[Viewing 4 of 4]
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Timer will not advance
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
terminal block melted
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
Parts Used:
Terminal Block Kit
  • jonathan from willow springs, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
53 of 67 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heating element dangling
Snapped in the clip
Parts Used:
Single Heating Element Support Clip
  • Victor from Miami Beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
10 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
back burner not getting hot
unplug stove first...take back of stove off to get to burner switch remove wires colors coded.. get new switch put wires on the same way.plug stove in test burner...very simple to replace.and save $$$$$$$$
Parts Used:
Range Surface Element Control Switch - 6 Inch - 1560 W
  • William from Shenandoah, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!