J47901 General Electric Range - Overview

Diagrams for J47901

See every part. Know exactly what you need.

Parts for the J47901

$56.93

Tilt Lock Hinge Mounted Surface Burner Kit - 6"

★★★★★

(1)

Part #WB30X342

This 6-inch surface element provides heat for boiling, frying, and simmering on an electric range. Its 3-wire, tilt-lock design runs on 240 volts and produces about 1,325 watts. Replace it if it does not heat, heats unevenly, or has burned or broken areas. Before ordering, inspect the control switch, wire ends, and mounting parts. Confirm...Read more

Read less

$88.46

Bake Element

★★★★★

(3)

Part #WB44X196

This bake element has screw-on terminals.

UNIT 2500W

Part #WB44X136

Common Symptoms of the J47901

How this model fails, and the parts that fix it.

Element will not heat

Fixed by
these parts

Show All

Little to no heat when baking

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

heating element went out

2 of 2 people found this instruction helpful.

vanessa from DARBY, PA
Really Easy
30 - 60 mins
Socket set

replace with new one

Was this helpful?

Replaced the bake element (lower element) in the small oven

2 of 2 people found this instruction helpful.

Marcia from SALEM, OR
Really Easy
30 - 60 mins
Nutdriver, Screw drivers

Disconnected range from power. Removed small / lower shield that protects element connectors from rear of range. Disconnected the power lines from the element using screwdriver. Removed racks and liner from oven. Removed screws at rear of oven box that hold old element. Removed the old element. Reversed steps to install replacement ... Read more

Read less

Was this helpful?

Oven element burned out.

1 person found this instruction helpful.

Carol from STONY BROOK, NY
Easy
15 - 30 mins
Screw drivers, Socket set

Turn off electricity to the oven. A socket set was needed for the small screws in my old oven. Once the screws were removed the element came off easily from two wires in the oven. You have to be careful when handling the wires that they don’t fall back into the oven. The new part was attached to the two wires, screws were tightened on the ... Read more

Read less

Was this helpful?