EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

J370*01 General Electric Range - Overview

Diagrams for J370*01

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broil Element – Part Number: WB44X173
$47.31
In Stock
Broil Element
★★★★★
★★★★★
(30)
Part #WB44X173
The broil element is located at the top of the oven and gives off heat in order to bake evenly. If you notice that the element is not heating up or is not cooking evenly it could be because it is broken or burnt out. The depth of the screw-on terminals is 2-3/4 inches and they are 1-1/4 inches apart. Does not include mounting bracket. All you need for this simple repair is small screwdriver. To complete this repair, you will need to first turn the oven off (or shut off the house circuit breaker), remove the two screws that are holding the old element in place, remove the two wires from the old part, and then connect them to the new part and screw back into place.
Range Infinite Heat Switch Kit – Part Number: WB21X36771
$53.20
In Stock
Range Infinite Heat Switch Kit
★★★★★
★★★★★
(16)
Part #WB21X36771
The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.
8 Inch Surface Burner – Part Number: WB30X348
$63.64
In Stock
8 Inch Surface Burner
★★★★★
★★★★★
(6)
Part #WB30X348
This surface element kit includes an 8 inch element, two wire, 2350 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with an attached trim ring.
Tilt Lock Hinge Mounted Surface Burner Kit - 6" – Part Number: WB30X342
$56.93
In Stock
Tilt Lock Hinge Mounted Surface Burner Kit - 6"
★★★★★
★★★★★
(1)
Part #WB30X342
This 6-inch surface element provides heat for boiling, frying, and simmering on an electric range. Its 3-wire, tilt-lock design runs on 240 volts and produces about 1,325 watts. Replace it if it does not heat, heats unevenly, or has burned or broken areas. Before ordering, inspect the control switch, wire ends, and mounting parts. Confirm the size, voltage, wattage, and fit with the full appliance model. Turn off the correct breaker and verify that power is off before service. Let the element cool and secure each wire before testing.
Timer Kit – Part Number: WB19X10008
$280.27
Special Order
Timer Kit
★★★★★
★★★★★
(1)
Part #WB19X10008
This kit replaces some mechanical clocks. ***Please NOTE: The wiring of this part may be difficult and it is best to have it installed by appliance repair person.
8" Multi Temperature Element Kit - 2500W – Part Number: WB30X357
No Longer Available
8" Multi Temperature Element Kit - 2500W
Part #WB30X357
Hardware included.
Oven Sensor – Part Number: WB21X5207
No Longer Available
Oven Sensor
Part #WB21X5207
This sensor is used for later gas range models and has yellow leads. It offers 17.5 ohms of resistance and you can use it with a responder. This oven sensor is suitable for use with many of GE's brands of gas ranges and ovens.
CONTROL BD – Part Number: WB24X162
No Longer Available
CONTROL BD
Part #WB24X162
DISCONTINUED – Part Number: WB24X190
No Longer Available
DISCONTINUED
Part #WB24X190
DISCONTINUED – Part Number: WB22X53
No Longer Available
DISCONTINUED
Part #WB22X53
DISCONTINUED – Part Number: WB24X131
No Longer Available
DISCONTINUED
Part #WB24X131
DISCONTINUED – Part Number: WB21X180
No Longer Available
DISCONTINUED
Part #WB21X180

Common Symptoms of the J370*01

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Large burner would operate on high setting only.
22 of 28 people found this instruction helpful.
  • Ernest from Bellevue, NE
  • Really Easy
  • 15 - 30 mins
  • Pliers, Socket set
1. Removed the back panel.
2. Disconnected the wires from the old switch while connecting wires to the new switch one at a time.
3. Installed the new switch and broke off the excess metal on the post which fits into the burner knob on front of the range.
4. Replaced the burner knob and replaced the back panel.
Was this helpful?
Thank you for voting!
Broiler Element Burned Out
17 of 19 people found this instruction helpful.
  • Richard from Vestal, NY
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Socket set, Wrench set
Successful repair to Our GE range, manufactured prior to 1965 (when installed in house). Pulled range from wall, unplugged, removed burned-out broiler element. Previous check with GE to make cross reference of range part number to Part-select part number for this nearly 50-year-old range. Obtained new part and installed. Works. Range has self-cleaning oven, accidentally destroyed thermal switch attached to element mounting bracket, difficulty with frozen mounting nut. Self-cleaning still works; thermal switch locks out a solenoid which defeats door latch; prevents premature opening of oven door when oven too hot to open safely. Internet search did not find GE part but there are generic devices of the same type available; will consider installation later.
Was this helpful?
Thank you for voting!
Broiler element not working
9 of 11 people found this instruction helpful.
  • Shawn from Newburg, PA
  • Easy
  • 15 - 30 mins
  • Nutdriver
Pull the stove out from the wall and unplug. Had to remove back of stove, the aluminum sheilding and the duct work to get at wires use nut driver. Then used nut driver to remove nuts from broiler unit inside stove. Take the front overn dover off first. The new part did not match up with the wires so I used a needle nose to spread the wi re clips just a tad so they would fit over the tabs of the broiler unit. Do all of this behind the stove as you do not have eough wire to do this effectively from the oven side. After I had the tabs fitted to the broiler unit. I removed them and fed wires back through the stove. I then went back to the front of the stove and put the broiler back in and put support bar back in to ceiling of stove and the two nuts back on to affix broiler to back of oven. Put the aluminum baccking and duct work back onto the back of the stove and plugged it back in. Pretty easy job.
Was this helpful?
Thank you for voting!