IPU98665 Inglis Dishwasher - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sound of a bearing wearing out, louder than normal operation
Removed the screws under the counter, retracted the leveling bolt jacks, turned off power to unit, turned off water supply to unit and made sure that all the water was out of the unit. Disconnect supply and drain lines. slide out unit from under counter and put protection over the door then lay it over onto the door. unplug the motor remove the screw that holds the motor in place, turn the motor counterclock wise, wiggle the motor in a side to side motion and it will come right out.(GLOVES ARE RECOMENDED FOR THIS OPERATION). Use cooking spray or olive oil on the O-ring. line up the arrow on the pump housing with the arrow on the pump motor and put the unit back together in the reverse order. Test the unit with a operation of a quick rinse to check of leaks. This is a very easy repair.
Parts Used:
-
John from Ketchikan, AK
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Wheel and mounts had disintegrated with age.
After watching the excellent video I was able to replace the old parts with the new in less than ten minutes! "Bob's your uncle" and no tools needed!
Parts Used:
-
Lawrence from Tacoma, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Heat element broken
-
Dana from Palm City, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers, Socket set, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!